×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

*
*
*
*

Thanks. We have received your request and will respond promptly.

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

ISDN BRI Configuration

thread468-1638645

ISDN BRI Configuration

ISDN BRI Configuration

(OP)
Hello, i just purchased a Madge Intelligent Switch and have configured 2 ports with SPID info... i made through layers 1 and 2 but stuck on the network layer...google searches are pointing to the incorrect number dialed... i am a CCVP and CCSP but dont have much experience with ISDN please help... heres the config and TS outputs


 version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname r1
!
boot-start-marker
boot-end-marker
!
enable password cisco
!
no aaa new-model
ip subnet-zero
ip cef
!
isdn switch-type basic-dms100
!
username r4 password 0 cisco
!
interface Loopback0
 ip address 11.1.1.1 255.255.255.0
!
interface FastEthernet0/0
 ip address 192.168.1.1 255.255.255.224
 duplex auto
 speed auto
!
interface BRI0/0
 description To ISND SLOT 3 Port 1
 ip address 1.0.0.2 255.0.0.0
 encapsulation ppp
 no ip route-cache cef
 no ip route-cache
 no ip mroute-cache
 dialer idle-timeout 75
 dialer wait-for-carrier-time 60
 dialer map ip 1.0.0.1 name r4 2125554001
 dialer-group 1
 isdn switch-type basic-dms100
 isdn spid1 2125551001
 isdn spid2 2125551002
 isdn T310 5000
 ppp authentication chap
!
interface Serial0/0
 no ip address
 encapsulation frame-relay
 no fair-queue
!
interface Serial0/0.1 point-to-point
 ip address 10.1.1.1 255.255.255.0
 ip ospf priority 255
 frame-relay interface-dlci 102   
!
interface Serial0/0.2 multipoint
 ip address 10.2.2.1 255.255.255.0
 ip ospf priority 255
 frame-relay map ip 10.2.2.3 103 broadcast
 frame-relay map ip 10.2.2.4 104 broadcast
!
interface FastEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
!
router eigrp 1
 redistribute ospf 10 metric 1 15 15 15 15
 network 192.168.1.0
 auto-summary
!
router ospf 10
 log-adjacency-changes
 redistribute eigrp 1 metric 100000 subnets tag 10
 redistribute eigrp 10
 network 10.1.1.0 0.0.0.255 area 0
 network 10.2.2.0 0.0.0.255 area 0
 neighbor 10.2.2.3
 neighbor 10.2.2.4
!
ip http server
ip classless
!
dialer-list 1 protocol ip permit
route-map EIGRP2OSPF permit 10
 match tag 10
 match route-type internal
!
line con 0
line aux 0
line vty 0 4
 password cisco
 login
!
end


r1#sho isdn stat
Global ISDN Switchtype = basic-dms100
ISDN BRI0/0 interface
    dsl 0, interface ISDN Switchtype = basic-dms100
    Layer 1 Status:
    ACTIVE
    Layer 2 Status:
    TEI = 64, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
    TEI = 65, Ces = 2, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
    TEI 64, ces = 1, state = 8(established)
        spid1 configured, no LDN, spid1 sent, spid1 valid
        Endpoint ID Info: epsf = 0, usid = 1, tid = 0
    TEI 65, ces = 2, state = 8(established)
        spid2 configured, no LDN, spid2 sent, spid2 valid
        Endpoint ID Info: epsf = 0, usid = 2, tid = 0
    Layer 3 Status:
    0 Active Layer 3 Call(s)
    Active dsl 0 CCBs = 0
    The Free Channel Mask:  0x80000003
 Total Allocated ISDN CCBs = 0

r1#deb isdn q921
debug isdn q921 is        ON.

*Mar  4 18:25:19.313: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=65 nr=0
*Mar  4 18:25:19.333: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=65 nr=0
*Mar  4 18:25:23.637: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=64 nr=27
*Mar  4 18:25:23.657: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=64 nr=18
*Mar  4 18:25:29.333: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=65 nr=0
*Mar  4 18:25:29.353: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=65 nr=0
*Mar  4 18:25:33.657: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=64 nr=27
*Mar  4 18:25:33.677: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=64 nr=18
*Mar  4 18:25:34.121: ISDN BR0/0 Q921: User RX <- IDCKRQ ri=0 ai=64
*Mar  4 18:25:34.125: ISDN BR0/0 Q921: User TX -> IDCKRP ri=43711 ai=64
*Mar  4 18:25:34.161: ISDN BR0/0 Q921: User RX <- IDCKRQ ri=0 ai=65
*Mar  4 18:25:34.165: ISDN BR0/0 Q921: User TX -> IDCKRP ri=22192 ai=65o
*Mar  4 18:25:35.117: ISDN BR0/0 Q921: User RX <- IDCKRQ ri=0 ai=64
*Mar  4 18:25:35.121: ISDN BR0/0 Q921: User TX -> IDCKRP ri=49585 ai=64
*Mar  4 18:25:35.157: ISDN BR0/0 Q921: User RX <- IDCKRQ ri=0 ai=65
*Mar  4 18:25:35.161: ISDN BR0/0 Q921: User TX -> IDCKRP ri=56514 ai=65int
*Mar  4 18:25:39.357: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=65 nr=0
*Mar  4 18:25:39.377: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=65 nr=0bri0/0

BRI0/0 is up, line protocol is up (spoofing)
description To ISND SLOT 3 Port 1
  Hardware is PQUICC BRI
  Description: port 5
  Internet address is 1.0.0.2/8
  MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation PPP, loopback not set
  Keepalive set (10 sec)
  Last input 00:00:03, output never, output hang never
  Last clearing of "show interface" counters 3d08h
  Input queue: 0/75/1/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: weighted fair
  Output queue: 0/1000/64/0 (size/max total/threshold/drops)
     Conversations  0/1/16 (active/max active/max total)
     Reserved Conversations 0/0 (allocated/max allocated)
     Available Bandwidth 48 kilobits/sec
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     39974 packets input, 183407 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
     1 input errors, 1 CRC, 0 frame, 0 overrun, 0 ignored, 1 abort
     39966 packets output, 184476 bytes, 0 underruns
     0 output errors, 0 collisions, 62 interface resets
 
*Mar  4 18:25:43.677: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=64 nr=27
*Mar  4 18:25:43.697: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=64 nr=18
*Mar  4 18:25:49.377: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=65 nr=0
*Mar  4 18:25:49.397: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=65 nr=0.
*Mar  4 18:25:53.697: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=64 nr=27
*Mar  4 18:25:53.717: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=64 nr=18
*Mar  4 18:25:59.397: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=65 nr=0
*Mar  4 18:25:59.417: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=65 nr=0
*Mar  4 18:26:03.721: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=64 nr=27
*Mar  4 18:26:03.741: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=64 nr=18

ping 1.0.0.1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.0.0.1, timeout is 2 seconds:
Success rate is 0 percent (0/5)
r1#isdn test call int bri0/0:1 4001
r1#isdn test call int bri0/0:1 4001
*Mar  4 18:28:01.873: ISDN BR0/0 Q921: User TX -> INFO sapi=0 tei=64, ns=34 nr=51
*Mar  4 18:28:01.909: ISDN BR0/0 Q921: User RX <- RR sapi=0 tei=64 nr=35
*Mar  4 18:28:01.933: ISDN BR0/0 Q921: User RX <- INFO sapi=0 tei=64, ns=51 nr=35
*Mar  4 18:28:01.937: ISDN BR0/0 Q921: User TX -> RR sapi=0 tei=64 nr=52
*Mar  4 18:28:01.961: ISDN BR0/0 Q921: User RX <- INFO sapi=0 tei=64, ns=52 nr=35
*Mar  4 18:28:01.965: ISDN BR0/0 Q921: User TX -> RR sapi=0 tei=64 nr=53
*Mar  4 18:28:01.973: ISDN BR0/0 Q921: User TX -> INFO sapi=0 tei=64, ns=35 nr=53
*Mar  4 18:28:02.005: ISDN BR0/0 Q921: User RX <- RR sapi=0 tei=64 nr=36
*Mar  4 18:28:02.029: ISDN BR0/0 Q921: User RX <- INFO sapi=0 tei=64, ns=53 nr=36
*Mar  4 18:28:02.029: ISDN BR0/0 Q921: User TX -> RR sapi=0 tei=64 nr=54

r1#deb isdn q931
isdn test call int bri0/0:1 4001

*Mar  4 18:28:09.605: ISDN BR0/0 Q921: User TX -> INFO sapi=0 tei=64, ns=36 nr=54
*Mar  4 18:28:09.609: ISDN BR0/0 Q931: SETUP pd = 8  callref = 0x62
    Bearer Capability i = 0x8890
        Standard = CCITT
        Transfer Capability = Unrestricted Digital
        Transfer Mode = Circuit
        Transfer Rate = 64 kbit/s
    Channel ID i = 0x83
    Called Party Number i = 0x80, '4001'

        Plan:Unknown, Type:Unknown

*Mar  4 18:28:09.645: ISDN BR0/0 Q921: User RX <- RR sapi=0 tei=64 nr=37
*Mar  4 18:28:09.665: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=65 nr=0
*Mar  4 18:28:09.669: ISDN BR0/0 Q921: User RX <- INFO sapi=0 tei=64, ns=54 nr=37
*Mar  4 18:28:09.669: ISDN BR0/0 Q931: CALL_PROC pd = 8  callref = 0xE2
    Channel ID i = 0x89
*Mar  4 18:28:09.673: ISDN BR0/0 Q921: User TX -> RR sapi=0 tei=64 nr=55
*Mar  4 18:28:09.697: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=65 nr=0
*Mar  4 18:28:09.705: ISDN BR0/0 Q921: User RX <- INFO sapi=0 tei=64, ns=55 nr=37

*Mar  4 18:28:09.709: ISDN BR0/0 Q931: DISCONNECT pd = 8  callref = 0xE2

    Cause i = 0x829C - Invalid number format (incomplete number)
*Mar  4 18:28:09.709: ISDN BR0/0 Q921: User TX -> RR sapi=0 tei=64 nr=56
*Mar  4 18:28:09.717: ISDN BR0/0 Q921: User TX -> INFO sapi=0 tei=64, ns=37 nr=56
*Mar  4 18:28:09.717: ISDN BR0/0 Q931: RELEASE pd = 8  callref = 0x62
*Mar  4 18:28:09.749: ISDN BR0/0 Q921: User RX <- RR sapi=0 tei=64 nr=38
*Mar  4 18:28:09.761: ISDN BR0/0 Q921: User RX <- INFO sapi=0 tei=64, ns=56 nr=38
*Mar  4 18:28:09.761: ISDN BR0/0 Q931: RELEASE_COMP pd = 8  callref = 0xE2
*Mar  4 18:28:09.765: ISDN BR0/0 Q921: User TX -> RR sapi=0 tei=64 nr=57
*Mar  4 18:28:19.697: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=65 nr=0
*Mar  4 18:28:19.717: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=65 nr=0
*Mar  4 18:28:19.765: ISDN BR0/0 Q921: User TX -> RRp sapi=0 tei=64 nr=57
*Mar  4 18:28:19.789: ISDN BR0/0 Q921: User RX <- RRf sapi=0 tei=64 nr=38


User Access Verification

Current configuration : 1314 bytes
!

Router 2

version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname r4
!
boot-start-marker
boot-end-marker
!
enable password cisco
!
no aaa new-model
memory-size iomem 10
no network-clock-participate slot 1
no network-clock-participate wic 0
ip cef
!
no ip domain lookup
!
multilink bundle-name authenticated
!
isdn switch-type basic-dms100
!
!
username r1 password 0 cisco
archive
 log config
  hidekeys
!
interface FastEthernet0/0
 ip address 192.168.4.4 255.255.255.224
 duplex auto
 speed auto
!
interface Serial0/0
 ip address 10.2.2.4 255.255.255.0
 encapsulation frame-relay
 frame-relay map ip 10.2.2.1 401 broadcast
!
interface BRI0/0
 ip address 1.0.0.1 255.0.0.0
 encapsulation ppp
 dialer idle-timeout 75
 dialer map ip 1.0.0.2 name r1 2125551001
 dialer-group 1
 isdn switch-type basic-dms100
 isdn timer T310 5000  4001
 isdn spid1 2125554001
 isdn spid2 2125554002
 ppp authentication chap
!
ip forward-protocol nd
!
ip http server
no ip http secure-server
!
dialer-list 1 protocol ip permit
!
r4#

RE: ISDN BRI Configuration

int bri0/0
 dialer-list 1 protocol IP permit

can't get L3 w/o IP...:)

Burt is Hurt

Cisco IOS Software, C2600 Software (C2600-ADVENTERPRISEK9-M), Version 12.4(25c), RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1523-2010 by Cisco Systems, Inc.
Compiled Thu 11-Feb-1539 23:02 by ßµ®†Šß€€Š

ROM: System Bootstrap, Version 12.2(7r) [ÝØÝØMØÑ], RELEASE SOFTWARE (fc1)

Edge uptime is 469¼  

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login
Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close