Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Reinstalling SBS2003 R2 OEM on HP ML150 Proliant box
- Thread starter schomberg
- Start date
blister911
MIS
If you're looking for a complete, fresh install, I would do a system erase from the Smart Start CD, then reconfigure your array (Smart Start CD), then reinstall the OS.
Light travels faster than sound. That's why some people appear bright until you hear them speak.
Light travels faster than sound. That's why some people appear bright until you hear them speak.
JackOfSomeTrades
Technical User
You sure ML150 is Smart Start'able!?
The most recent ones I've dealt with (about 6-8 months back), they supported the P200 (I think) controller, but not 100% sure you can Smart Start it.
I have a feeling for 2003 SBS you'll have to plumb a USB floppy in, and press F6 during setup to point it at the floppy for the Controller Drivers.
Hope you got it sorted!!
Mark
The most recent ones I've dealt with (about 6-8 months back), they supported the P200 (I think) controller, but not 100% sure you can Smart Start it.
I have a feeling for 2003 SBS you'll have to plumb a USB floppy in, and press F6 during setup to point it at the floppy for the Controller Drivers.
Hope you got it sorted!!
Mark
- Thread starter
- #4
- Status