IP Trade with CUCM IP Trade with CUCM lewismorgan (IS/IT--Management) (OP) 22 Nov 10 10:22 Has anybody had any experience of IP Trade with CUCM? What integration is supported between Cisco phones and IP Trade Turret and what levels of software does it integrate with on CUCM? RE: IP Trade with CUCM Jackelle1 (Vendor) 23 Nov 10 16:57 IP Trade has no direct presence in North America, Speakerbus iD808 trading turret; Compliant Certification with the CUCM 7.x and 8.x. Reduced operational footprint including cost, space requirement in back room and energy consumption from integrated turret and CUCM. Access to Power Trader feature set including, Shared lines, One-click collaboration, Single-number reach, Presence information, Rich-media interaction with clients, Secure mobility and Compliance. Synergy of Business Continuity between CUCM and trading turret RE: IP Trade with CUCM lewismorgan1 (TechnicalUser) 24 Nov 10 12:29 Many thanks for your feedback-I will take a look at the Speakerbus iD808 turret.However, as per my original post, I am keen to find out what integration is supported between Cisco phones and the IP Trade Turret. RE: IP Trade with CUCM OP27 (Vendor) 9 Dec 10 00:44 IP Trade turrets integrate to CUCM using SIP and are supported on CUCM version 5.0.4 onwards. They are tested and have clients on versions up to 8. They can also support CallManager Express and the turrets and private wires can also fail over to SRST if you use it.