×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Zebra 90xill Printer

Zebra 90xill Printer

Zebra 90xill Printer

(OP)
This printer was working okay, but now misses every other label. Otherwise working fine

Using Nice drivers. checked label size is correct for printing

Have removed and re-installed drivers

Have cleaned the media sendsor

Using XP 64 bit

Before I send this into orbit can anyopne please help?

RE: Zebra 90xill Printer

(OP)
Am I the olny one to have had this problem???
 

RE: Zebra 90xill Printer

(OP)
Hi

Clearly no-one has had this problem on this forum

can anyone suggest an alternative forum???

Must say its a very frustrating problem

RE: Zebra 90xill Printer

I am not familiar with that particular printer, but ...

Perhaps this is a 64 bit issue

Perhaps this is an issue with your application and not the driver

I notice that the printer does 300 or 600 dpi?? If that is the case, try changing the resolution and see if that has any effect.

Is this a "window only" printer, or can you program it using a zebra printer language like ZPL II?

As a last resort you could try calling Zebra tech support. On the couple of occasions where I needed some clarification, they were VERY helpful.
 

Jim Asman
http://www.spectracolorservices.com

RE: Zebra 90xill Printer

Get your user's manual and perform a "recalibration".

It should involve a particular sequence of "button pushing" on the printer itself.

 

Jim Asman
http://www.spectracolorservices.com

RE: Zebra 90xill Printer

(OP)
Thanks for the suggestions

Used different computer and loaded different drivers (seagull)

Printer can be programmed with ZPL 11 but have never done so

Have used sifferent software

Zebra do not want to know as this is now an unsupported printer

Still no luck in solving problem

RE: Zebra 90xill Printer

(OP)
Hi

I did a media calibration and a media/ribbon calibration to no effect
thanks

 

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close