Option 11 Compitability Question 1

nortel did have that chart on their tech-web.. i do not have a clue were avaya moved it... the link i had is reaching the dreaded 404 page

john poole
bellsouth business
columbia,sc

try this:


__________________________________________________________
Find a job you love and you'll never work a day in your life. - Confucius

According to that document, it would appear that all SSC cards vintages will load any software version, but any advanced software feature functionality is card revision dependent. Does anyone agree or disagree with that?

under the M1-CS1000 HareWare compatibility tab it shows 5.5 as the highest supported rls...it's the last column also the specific vintage limitations are listed (ca, ha, ja... etc.)



__________________________________________________________
Find a job you love and you'll never work a day in your life. - Confucius

Here is your answer along with other useful information for the SSC cards, taken from an old guide of mine that I got for the UK market around 4 to 5 years ago.

Option 11C Cabinet & Chassis, CS1000M Cabinet, CS1000M Chassis, CS1000S,MG1000E, MG1000B and MG1000T

PARM and OVLY (Overlay 17).

LPIB 150
Release 24 for Option 11C Cabinet and Option 11C Chassis
450
Release 25 ² Release 4 and 4.53 ³ CS1000M Cabinet &
Chassis, CS1000S, MG1000B & MG1000T

HPIB 150
Release 24 for Option 11C Cabinet and Option 11C Chassis¹
450
Release 25 ² Release 3, 4 and 4.5 ³ CS1000M Cabinet & Chassis, CS1000S, MG1000B,MG1000E & MG1000T

¹ Source – Capacity Engineering 553-3001-149 release 24
² Source – Capacity Engineering 553-3001-149 release 25.40
³ Source – Planning & Engineering 553-3041-120 release 4.00 553-3041-120 release 4.50 Succession Enterprise release 3.00 GRB 2003_368

500B 100 N/A (set by system to 500 and values entered here are ignored)
SLIB 16 This is the lowest value possible. It is not used by UK systems.
DTIB 70 Use this value regardless of the number of links.
DTOB 70 Use this value regardless of the number of links.
PCDR NO
CY45 01
BKGD 44
DROL 30 43 44 60*

• Overlay 60 should only be included if Q931 or QSIG or EURO ISDN or CHAS are equipped.


Minimum Recommended Call Registers

NCR 1000 Release 23 S/W
1750 Release 24 S/W *
1750 Release 25 S/W **
800 Release 3/4/4.5 MG1000B***
1750 Release 3/4/4.5 CS1000M Cabinet/Chassis ****
1750 Release 3/4/4.5 MG1000T, CS1000S ¹•²


* Source – Capacity Engineering 553-3001-149 release 24
** Source – GRB release 25.40B
*** Source – Branch Office Inst & Config NTP 553-3001-214 Rlse 4
**** Source – CS1000M & Meridian 1 Small System Planning & Engineering NTP 553-3011-120 Rlse 4
¹ Sources – CS1000E & CS1000S Planning & Engineering NTPs 553-3041-120 & 553-3031-120 Rlse 4
² Source- CS1000M & Meridian 1 Large System Planning & Engineering NTP 553-3021-120 Rls 4.5

If call register overflows are suspected, use System traffic reports or Diagnostic patch 1516 or 2525 to localise if available (pdt> commands can be used)

MGCR 25 Only if ACD Max is equipped (If no Max, set to 0)
CSQI 255 At Release 4 and ABOVE this Total can be up to 25% of total call registers up to a max of 4095
CSQO 255

Intu (overlay 97)
INTU NO
NB. Most customers prefer to have no conference warn tone (NO). However, if INTU is set to YES, warn tone may result in corruption of coincident MF4 tones.

Hardware compatibility
The following table shows Option 11C and CS software daughterboards & the software releases that they are compatible with. New orders will receive the new NTTK25BA software daughterboard.

Software Daughterboard: Loaded with S/W Release Capacity Compatible with S/W
NTSK04AC 22-46 32 Meg 22-46
NTSK04AG 23-47 32 Meg 23-47
NTSK04AK 24-25 40 Meg 24-25
NTDK21AA Blank 32 Meg Rlse 22.08D – 23.47
NTDK81AA Blank 40 Meg Rlse 23.47 – 24.25
NTTK13AA Blank 48 Meg Rlse 24.25 – 25.XX & Succession 3¹
NTTK25AA Blank 48 Meg 25.XX and Succession 3¹
NTTK25BA Blank 48 Meg Release 4.00 / 4.50

¹ NTTK13AA and NTTK25AA will work fine right up to and including 4.5W as long as the DRAM on the CPU is changed for a 32Mb.

System Minimum SSC/MSC Compatible with S/W
11C/Cabinet NTDK20CA Rlse 24.25 with 4 –5 cabinets – 25.XX and Succession 3
NTDK20EA Main cabinet when using IP Expansion and …
NTDK20CA For each IP Expansion cabinet
Chassis NTDK97AB
NTDK20EA Main and IP Expansion chassis when using IP Expansion
Succession 1000 NTDK20EA Call Server and Media Gateway
Succession Branch Office NTDK20FA
MG1000T/1000E/
MG1000B/CS1000S NTDK20HA Minimum vintages for the

Small System Controller are
• IP Expansion or CS 1000 Systems
Main Cabinet: NTDK20EA-GA SSC + NTDK19BA SSC Memory Upgrade Kit (32Mb)
Each Expansion cabinet: NTDK20AB-GA SSC + NTDK19BA SSC Memory Upgrade Kit (32Mb)
NTDK20HA
• Media Gateway 1000E in CS 1000E systems
NTDK20GA SSC + NTDK19BA SSC Memory Upgrade Kit (32Mb)
NTDK20HA

An existing Option 11C system equipped with a controller card NTDK20AB can be upgraded to an NTDK20CA with a field upgrade kit NTDK19AA.
A system upgrading to Release 25 or Succession 3 must replace its NTDK21 (32 MB) or NTDK81 (40 MB) based software daughterboard, with an NTTK13AA (48 MB) or NTTK25AA daughterboard. Please ensure that you have upgraded the bootcode on the SSC prior to upgrading the software daughterboard. To verify the size of the software daughterboard and for installation instructions, refer to NTP upgrade manual Chapter 9.
The Succession Branch Office Call Server requires a 48MB Total Memory (32 MB Program Store and 16 MB CDrive space) in order to run Succession 3.0 Software.


All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.

Thank you! This is very helpful!

yea, what he said.. thanks fb

john poole
bellsouth business
columbia,sc