Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Setup Hunt Group on Meridian 1 Option 11 1
- Thread starter wksw
- Start date
- Thread starter
- #4
-
1
- #6
matambanadzo
Programmer
Hi
All you need to do is create a Group Hunt List (GHT) in ld 18. It is programmed much like a speedcall list, simply assign the analogue dn's to entries in the list, once completed it would look similar to this when printed in ld 20.
00 5500
01 5501
02 5502
..
..
15 5516
Once the list is created, you need to create the Pilot Number (PLDN) for the GHT, this is created in ld 57. You simple create a dn and assign the list number that you just created. Once completed, if set to linear hunting, when the PLDN is dialled, dn 5500 will ring. The next call will try 5500 and find it busy thus 5501 will ring.. etc.
Give it a go.
All you need to do is create a Group Hunt List (GHT) in ld 18. It is programmed much like a speedcall list, simply assign the analogue dn's to entries in the list, once completed it would look similar to this when printed in ld 20.
00 5500
01 5501
02 5502
..
..
15 5516
Once the list is created, you need to create the Pilot Number (PLDN) for the GHT, this is created in ld 57. You simple create a dn and assign the list number that you just created. Once completed, if set to linear hunting, when the PLDN is dialled, dn 5500 will ring. The next call will try 5500 and find it busy thus 5501 will ring.. etc.
Give it a go.
- Status
Similar threads
- Locked
- Question
- Locked
- Question