×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Help with linking two NCP 500

Help with linking two NCP 500

Help with linking two NCP 500

(OP)
Hi,im a newbie to the site.
Need some help with linking 2 NCP500's via a vpn at remote sites. I have good knowledge of the system but this is my first time with voip. i Just Need a basic out line of the system programing. only need basic communication between the two sytems.
Any help is greatly appreciated
thanxs in advance  

RE: Help with linking two NCP 500

do you have software to program? what country are you in?

RE: Help with linking two NCP 500

(OP)
yes have unified maintenance console and im in the uk

RE: Help with linking two NCP 500

what do you have for bandwidth ? are you using the same provider on both ends ? do you  static ip's @ each ?
do you have a VPN setup between the 2 locaation's? What type of Routers did you buy?

RE: Help with linking two NCP 500

Do you have a dsp card in each system

RE: Help with linking two NCP 500

(OP)
yeh i have a dsp card in both system, the same provider both ends, about 4mb speed at both ends and netgear vpn routers at both ends

RE: Help with linking two NCP 500

There is a bit of setting up so here is the main bits....


first you install a V-ipw16 card in the virtual trunk slot in the virtual shelf.
Then in activation keys change the number of activated ip-gw to 4/4 unless you want some sip trunks then use 2 or 3 any more and you will have to buy more licences

then right click on card and select shelf propertys



in here you set up the number to ip translation and set the lead number for incoming extension call (this is first digit of your extension range)

.In system programming put gateway trunks in to a different trunk group and set extension lead number of other system in other systems, in the number plan and then program extension lead number of other system in tie table and number of digits to follow i.e 2 if using 3 digit number range then tell it what trunk group the ip trunks are set to



Get that much done and you are on the way, any other things just ask.

RE: Help with linking two NCP 500

(OP)
thanx 4 the help guys

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close