×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

KXTD 1232 ISDN

KXTD 1232 ISDN

KXTD 1232 ISDN

(OP)
I have a KXTD 1232 with a BRI unit in slot 1 then two 8 extension units. I have looked at CMD 109 : Mast.:s;s ;E1;E2
Is this correct. Are my ISDN port numbers 03,04,05,06 and if so what trunk numbers will they be. I have tried to put trunk or co numbers 03-06 in TKG1 but the system says no CO assigned. I have a manual but...............

Thanks in advance.

RE: KXTD 1232 ISDN

which card do you have 384 or 386 09 ,10 ,11, 12  1-8 are loop co's do you have the ground screw in the card?  did you reset the system after installing the card spids an dn
in there properly

RE: KXTD 1232 ISDN

(OP)
Thanks for your reply. My ISDN BRI module fits on outside and is a 280. When I try and go to the to codes for SPID and DN 453 and 454 the system is telling me its TIE transfer and TIE to CO?

RE: KXTD 1232 ISDN

are you in europe?we dont have a 280 here and are you using
dos or windows for programing software?go to www.pbxinfo.com
panasonic forum ,there is a bloke from ireland and uk there that knows the bri stuff off the the top of there head bri never caught on in the usa i actually have my student study guide from back in 99 handy but i fear your isdn programing is not the same here!

RE: KXTD 1232 ISDN

(OP)
OK I'll give that a try. Thanks for your time.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close