×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

TDE to TDE networking.

TDE to TDE networking.

TDE to TDE networking.

(OP)
hi i have two TDE 600 and i cant make my networking work.
i already assigned an ip for each pabx.and when i don "ping" each ip. theyre already connected. i think im having aproblem with the dialling plan. can you help me with this one? thanks.

RE: TDE to TDE networking.

this is the full process i use and works fine however you will need to change the  ip addresses.

In the IP address box, type 192.168.1.100. = your laptop ip address
This is an example entry for the case when the card has the default IP address (192.168.1.200).
In the Subnet mask box, type 255.255.255.0.
Click OK.


Log onto the Card

Start Internet Explorer from the Start menu.
In the Address box of Internet Explorer, type http://192.168.1.200 (default IP address of the card).
Press the ENTER key on the keyboard.

User Name and Password


In the Username box, type Administrator (default user name).
In the Password box, type Administrator (default password).
Click LOGIN.

Stop the Card

Click 2.1 Change RUN/STOP status in the main menu

Click STOP for Status after changing. Click OK.




Program the ip address

Click 1.1 Network Settings, General in the main menu.


In the IP Address box, type ip address. on the company network
In the Subnet Mask box, type 255.255.255.0.
In the Default Gateway box, type Gateway Address. on the company network
Click OK.

Confirm your entry, and then click OK.




Hunting Type

Click Hunt Pattern (for Incoming Calls) in the main menu.
In the Hunt Pattern No. box, type 1.
A hunt pattern will be created with this numbering.
In the Receive Leading Number box, type 35 (PBX code).
Click ENTRY.
Click OK.
Confirm your entry, and then click OK.


IP Translation

Click DN2IP (Dialed Number to IP Address Translation) in the main menu.
Click 1.6.1 GW Entry.


Do the following to configure the gateway entry for the Site A office:
a. In the GW No. box, type 0.
A gateway entry for the card will be created with this numbering.
In the Comment box, type Site a name (a unique identifier of the card in the VOIP network).
In the IP Address box, type type ip address of site a.
In the Group No. box, type 0
Click ENTRY.

Do the following to configure the gateway entry for the Chicago office:
In the GW No. box, type 1.
In the Comment box, type Site b name.
In the IP Address box, type Type ip address of site B.
In the Group No. box, type 0.
Click ENTRY.
Click OK.
5.
Confirm your entry, and then click OK.


Extension Ringing Setup

Click PREVIOUS.
7.
Click DN2IP Entry.
8.
Do the following to configure the Site A extensions:
In the Leading Number box, type 352 (PBX code [35] + extension starting digit [2]).
In the Remaining Number of Digits box, type 2 (2 digits to dial [00 to 99] following the leading number).
Click GW for GW No/Group No. Selection.
In the GW No/Group No. box, type 0 (the gateway entry for the card).
Click ENTRY.
Referring to step 8, complete the address translation table as shown on the left.
Click OK.
Confirm your entry, and then click OK
Do again for second xdp numbers.


Click Download of DN2IP data (VOIP Gateway –> PC) in the main menu.


Click DOWNLOAD.

Click REBOOT in the main menu.

Click REBOOT



3.2.8Confirming the IP Address Assignment


After programming of the VOIP Gateway Card is finished, try to access the card with the new IP addressing information. If you can connect to the card without problems, the card can be placed on the LAN for VOIP operations (see "2.2.3 Connection to the LAN").
Follow the procedure below, referring to "3.1.1 Preparing the PC" and "3.2.1 Starting the IP-GW16 Maintenance Utility".
1.Set the IP address settings of the PC to the following values:
•IP address: 200.45.11.100
•Subnet Mask address: 255.255.255.0
2.Start Internet Explorer from the Start menu.
3.In the Address box of Internet Explorer, type http://200.45.11.35 (the new IP address of the card).
4.Press the ENTER key on the keyboard.
If you can log in, then the card has been successfully programmed.



3.3Programming the VoIP Gateway Card in the
Site B
In the Address box of Internet Explorer, type http://192.168.1.200 (default IP address of the card).
Make sure that the PC has the appropriate IP address setting to access the card (refer to "3.1.1 Preparing the PC").
Press the ENTER key on the keyboard.
In the Username box, type Administrator (default user name).
.In the Password box, type Administrator (default password).
Click LOGIN.
The main menu appears.
Click 2.1 Change RUN/STOP status in the main menu.
Click STOP for Status after changing.
Click OK.
Click OK.
Click OK.


Changing the Status of the VoIP Gateway Card

Click 2.1 Change RUN/STOP status in the main menu.
2.
a.Click STOP for Status after changing.
b.Click OK.
c.Click OK.
d.Click OK.

Click 1.1 Network Settings, General in the main menu.
2.
a.In the IP Address box, type 199.176.64.41.
b.In the Subnet Mask box, type 255.255.255.0.
c.In the Default Gateway box, type 199.176.64.1.
d.Click OK.
3.
Confirm your entry, and then click OK.


Assigning the Hunt Pattern
Note that the card in the Chicago office requires a different PBX code from the card in the Los Angeles office.
Click 1.5 Hunt Pattern (for Incoming Calls) in the main menu.
2.
a.In the Hunt Pattern No. box, type 1.
b.In the Receive Leading Number box, type 41 (PBX code).
c.Click ENTRY.
d.Click OK
Confirm your entry, and then click OK.


Uploading Address Translation Table to the VoIP Gateway Card
For the VoIP Gateway Cards in the Los Angeles and Chicago offices to communicate properly over the VoIP network, the cards must share the same address translation table.
Follow the procedure below to upload the address translation table downloaded from the card in the Los Angeles office (see "3.2.6 Downloading the Address Translation Table from the VoIP Gateway Card") to the card in the Chicago office.


Click 3.3 Upload of DN2IP data (PC –> VoIP Gateway) in the main menu.
2.
a.Click Browse and choose a file to upload.
b.Click UPLOAD(PC–>VoIP Gateway).


Click REBOOT.
4.
Click REBOOT.




Confirming the IP Address Assignment
Note that the card in the Chicago has been assigned a different IP address from the card in the Los Angeles office.
1.Set the IP address settings of the PC to the following values:
•IP address: 199.176.64.100
•Subnet Mask address: 255.255.255.0
2.Start Internet Explorer from the Start menu.
3.In the Address box of Internet Explorer, type http://199.176.64.41 (the new IP address of the card).
4.Press the ENTER key on the keyboard.
If you can log in, then the card has been successfully programmed.
After you have confirmed that the card has been successfully programmed, it is strongly recommended that you download the configuration data from the card and save it on your PC for backup and archive purposes.



Programming the PBX
Double-click CO & Incoming Call.
b.Double-click CO Line Setting.
c.Type the CO Name and assign an unused Trunk Group Number to be used for all VoIP gateway trunks.
d.Click OK.
6.
a.Double-click System.
b.Double-click Numbering Plan.
c.Double-click Feature.
d.In the Tie Line Access box, type the dialling number.
e.Click OK.
7.
a.Double-click Private Network.
b.Double-click TIE Table.
c.In the Own PBX Code box, type 35 (the PBX code of the local PBX in the network).
d.In the Leading Number box, type 41 (the PBX code of the remote PBX in the network).
e.In the corresponding Trunk Group list, click the number of the trunk group to be used when making calls.
f.Set the number modification pattern, if necessary.
g.Click OK.
8.
a.Double-click Configuration.
b.Double-click Slot.
c.Click Status of the card.
d.Set the status to OUS.
e.Click Card Type of the card.
f.In the Value list, click Overlap (default) or En-bloc*1.
g.Click OK.
h.Click Status of the card.
i.Set the status to INS.
repeat the procedure for the PBX site B


peter (www.vpi.ie)

RE: TDE to TDE networking.

(OP)
THANKS for the help rivet.now im already done in the programming.and it seems that "one way" working only.from pabx 1 i can call the locals but from pabx 2 to pabx 1.i cant.

my pabx 1 is 4 digits and my pabx 2 is 3digits.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close