EC500 - Change Off-PBX Telephone Station only allows 9 digits

Question

EC500 - Change Off-PBX Telephone Station only allows 9 digits

jsweet (TechnicalUser)

(OP)

3 Jun 09 09:35

When I go to change off-PBX telephone station mapping (EXT) I can only enter 9 digits for the telephone number even though the help says I can enter 15. I can't enter anything for the prefix.

CM 3.1

Any ideas?

Thanks

mikeydidit (IS/IT--Management) · Answer 1 · 2009-06-03 10:16:21

Under "Application" are you using EC500??

"A people that values its privileges above its principles soon loses both."
- Dwight D. Eisenhower (1890-1969), Inaugural Address, January 20, 1953

For the best response to a question, read FAQ690-6594: How to ask the best questions and site policies

jsweet (TechnicalUser) · Answer 2 · 2009-06-03 10:48:42

RE: EC500 - Change Off-PBX Telephone Station only allows 9 digits

jsweet (TechnicalUser)

(OP)

3 Jun 09 10:48

yes app is set to EC500. Thanks

mikeydidit (IS/IT--Management) · Answer 3 · 2009-06-03 10:55:00

Page 2

CODE

change off-pbx-telephone station-mapping 5xxxx                  Page   2 of   2
                  STATIONS WITH OFF-PBX TELEPHONE INTEGRATION

Station       Call       Mapping      Calls       Bridged
Extension     Limit      Mode         Allowed     Calls
5xxxx          2         both           all         both

When is the last time you helped someone, just because you were able to?

For the best response to a question, read FAQ690-6594: How to ask the best questions and site policies

jsweet (TechnicalUser) · Answer 4 · 2009-06-03 11:03:41

my page 2 is set to defaults 2 , both, all, both.

Thanks

mikeydidit (IS/IT--Management) · Answer 5 · 2009-06-03 11:19:24

CODE

change off-pbx-telephone configuration-set 1                    Page   1 of   1

                               CONFIGURATION SET: 1

      Configuration Set Description: Mikes EC500
               Calling Number Style: network
                CDR for Origination: phone-number
CDR for Calls to EC500 Destination? y
        Fast Connect on Origination? y
       Post Connect Dialing Options: dtmf
      Cellular Voice Mail Detection: none
                      Barge-in Tone? n
        Calling Number Verification? y
             Identity When Bridging: principal

When is the last time you helped someone, just because you were able to?

For the best response to a question, read FAQ690-6594: How to ask the best questions and site policies

jsweet (TechnicalUser) · Answer 6 · 2009-06-03 11:39:50

checked configuration-set

Everything is the same except my Fast Connect = n and my Cellular VM Detection is set to 'message'

Thank you

mikeydidit (IS/IT--Management) · Answer 7 · 2009-06-03 12:16:14

I am not sure what else to check for you. I set mine up using this this document

EC500 extension to cellular guide
Release 4
Installation and Administration Guide

and doing a search here for EC500. I am on 3.1.4 and it does allow me too.

Sorry i couldn't help you figure out what the problem is.

When is the last time you helped someone, just because you were able to?

For the best response to a question, read FAQ690-6594: How to ask the best questions and site policies

Come Join Us!

Posting Guidelines

Jobs

EC500 - Change Off-PBX Telephone Station only allows 9 digits