×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

ipecs 5.0 and sip trunk

ipecs 5.0 and sip trunk

ipecs 5.0 and sip trunk

(OP)
Hello
I want to set up a sip trunk on a ipecs 5.0, do anyone know how to do this?

RE: ipecs 5.0 and sip trunk

This discuusion has been made in the following thread: "Change of Broad band provider" thread1613-1538121: Change of Broad band provider.
You can get some good ideas, when you read it and also the sub treads listed.

///doktor

RE: ipecs 5.0 and sip trunk

I have got some additional information on this issue:

For the IPECS version 5.0 (E.0 Dj),
you need to check for the settings for PGM133 and PMG126.

PGM133:(This corresponds to the PGM350 of the ipLDK-100/300)
*1. Set SIP Attributes in PGM 133 as shown below.

    1) Soft Switch Type = Normal (or Broadsoft).
    2) Proxy Server Address : x.x.x.x (public IP address).
    3) Primary DNS Address   :  "DNS#1 IP Address"
    4) Secondary DNS Address :  "DNS#2 IP Address"
    5) Use outbound proxy -> ON.
    6) Connection Mode = UDP/ON.
    7) Set Domain Address as "x.x.x.x"

(More value can be set accordingly, but these are the most important)
------------------------------------------
------------------------------------------
PGM126 (for ALL SIP users, this must be done):
(This corresponds to the PGM 351 of the ipLDK-100/300).

PGM126:
1.  First set the Index number one-by-one in the top fields.
    First Index is # 1.

    Then set Order # of PGM126 as below.
    
    #1) User ID : 100@x.x.x.x
    #4) Contact number : 1000(Station number - e.g. 1000)
    #7) User ID Registration : Register
    #9) User ID Usage : True / ON

2. Set SIP User ID Table number of Station 1000 as 01.
   This gives Station number 100 the SIP Index #1 (01).
   PGM + 111 + 10001000 + BTN56+ 01 + [SAVE]
3. Reset IPECS manually.
4. Check if the user is registered to SIP Server normally.
5. Call the DDI number xxxx1000, registered in PGM231, as usual.

Makes sense?

IP address of x.x.x.x is your Public IP address.
Let me know about your progress.

///doktor

RE: ipecs 5.0 and sip trunk

Small correction:
100@x.x.x.x should be 1000@x.x.x.x



 

///doktor

RE: ipecs 5.0 and sip trunk

(OP)
Hello doktor
I will try, but when you go into prg133 it want a Sequence number is this voip kanal Sequence number

abl2910  

RE: ipecs 5.0 and sip trunk

A sequence number refers to the system port number. You can use 1 to 143 in a MFIM100. This is the total number of ports in the system, i.e. both CO lines and Station numbers.
Check the "System Capacity Overview" of MFIM100 in PGM102, and you will see this number. The MFIM100 consists of 70 station numbers and 42 CO lines, both can be SIP. Therefore you can up to 112 CO+STA numbers, the rest are for other functions UCS and WTIB gateways.
Remember that a SIP phone requires a license in the IPECS.
The SIP User ID Index Number of PGM126 kan take the value of 1-70, the station number range.

///doktor

RE: ipecs 5.0 and sip trunk

(OP)
Hello
I mean that sequence number is the number for the modul in prg102 (ipecs)

Iwant to know if the sequencenumber i prg133 is the number for voip

I have try some different thinks on the ipecs, i have a sip account with a number and a password and want to use this for a trunk line in the ipecs, but i can't make it work yet

abl2910

RE: ipecs 5.0 and sip trunk

You are right concerning that the sequence number is the number for the modules in PGM102 .
In PGM 126 you set the SIP index number, that also is set in PGM111 BTN56.
(Set SIP User ID Table number of Station 1000 as 01.
This gives Station number 100 the SIP Index #1 (01).
PGM + 111 + 10001000 + BTN56+ 01 + [SAVE])

///doktor

RE: ipecs 5.0 and sip trunk

(OP)
Hello doktor
This config in prg 126 is it not for extention?
I need config for sip trunk


abl2910
 

RE: ipecs 5.0 and sip trunk

Sorry for the delay in my response...

In PGM126 in the folder "Station Data" you set the "SIP User ID Index Number" for the actual SIP phone.
PGM 126 and PGM 111 are closely connected, because you set the "SIP User ID Index Number" , also in PGM 11 BTN 56.
And you use th "SIP User ID Index Number" in PGM 126 to set all the details for you SIP phone.
As earlier described the "SIP User ID Index Number" can have a value from 1 to 70 in MFIM100. This range is the number of stations.

The PGM131 needs the sequence number to be entered. This number is equal to the sequence number of PGM102, i.e. the IPECS module number (or IP phone sequence number).
Hope that this makes sense?
 

///doktor

RE: ipecs 5.0 and sip trunk

abl2910 have you solved your problem yet? If no I can send you an engineer manual on how to setup a SIP trunk using iPECS 5.0. There is basically 3 methods including creating a SIP trunk without any authorization as well as single and multiple authorization with the SIP provider.

I will also write a more concrete overview of these methods as every one of it require different settings through some examples. It would be enough to get a basic picture of how it works and to find a logics though. Also, what firmware u r using? Check for E.0Dr.

Cheers,
Ivo

RE: ipecs 5.0 and sip trunk

(OP)
Hello
Yes it's running now with a musimi.dk account
problem was that i should program clip on all ext.
For showing the right number, but SIP ext. i can't call from the sip to other ip phones and no outgoing lines


abl2910

RE: ipecs 5.0 and sip trunk

(OP)
Hello pleskuk

I am interested in the engineer manual on how to setup a SIP trunk , do you have an ftp server where i can get it?

I have firmware E.0Dr

abl2910

RE: ipecs 5.0 and sip trunk

Hi pleskuk and abl2910

You cannot post email addresses here in this forum, so you. pleskuk, could send this IPECS manual to me.

abl2910, you can send your email address to me and I will forward the manual to you.

Please use this link to see my address...
http://www.kandu.dk/spg97163.aspx

///doktor

RE: ipecs 5.0 and sip trunk

Hi guys,

Sorry for the delay.
Doktor, I have sent the manual to you. Please forward to abl2910.

Cheers,
Ivo

RE: ipecs 5.0 and sip trunk

I will asap!

///doktor

RE: ipecs 5.0 and sip trunk

Several (many) has asked direcly to me if they can have this SIP engineering report, but I can not mange to send it to all of you.
Please contact your local LG-Nortel represenative to hand it out to you.

///doktor

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close