CWmi::Connect(): ConnectServer(Namespace) failed. - 0x80070057
CWmi::Connect(): ConnectServer(Namespace) failed. - 0x80070057
(OP)
hi all,
i get this message in the cmm.log file when i try a client push installation using System Center Configuration Manager 2007. is there anyone out there who can help me understand why this happens and what the remedies are. I need to get this working as i have got theory knowledge bt im failing practically.
i get this message in the cmm.log file when i try a client push installation using System Center Configuration Manager 2007. is there anyone out there who can help me understand why this happens and what the remedies are. I need to get this working as i have got theory knowledge bt im failing practically.
RE: CWmi::Connect(): ConnectServer(Namespace) failed. - 0x80070057
CODE
CWmi::Connect(): ConnectServer(Namespace) failed. - 0x80070057 SMS_CLIENT_CONFIG_MANAGER 3/24/2009 9:57:45 AM 1848 (0x0738)
---> Unable to connect to WMI on remote machine "C2", error = 0x80070057. SMS_CLIENT_CONFIG_MANAGER 3/24/2009 9:57:45 AM 1848 (0x0738)
---> Deleting SMS Client Install Lock File '\\c2.topdog.net\admin$\SMSClientInstall.TDS' SMS_CLIENT_CONFIG_MANAGER 3/24/2009 9:57:45 AM 1848 (0x0738)
RE: CWmi::Connect(): ConnectServer(Namespace) failed. - 0x80070057
i have done some research on this. and i found out microsoft give a tool to diagonise WMI. its called wmidiag [google this]. i have used it to correct most of the problems but the remaining errors approximately 10. i have failed because i don't understand what they mean. im going to post a little snippet from the log file it produced. please help me with this.
CODE
57501 12:48:48 (1) !! ERROR: Default trustee 'BUILTIN\PERFORMANCE LOG USERS' has been REMOVED!
57502 12:48:48 (0) ** - REMOVED ACE:
57503 12:48:48 (0) ** ACEType: &h0
57504 12:48:48 (0) ** ACCESS_ALLOWED_ACE_TYPE
57505 12:48:48 (0) ** ACEFlags: &h12
57506 12:48:48 (0) ** CONTAINER_INHERIT_ACE
57507 12:48:48 (0) ** INHERITED_ACE
57508 12:48:48 (0) ** ACEMask: &h23
57509 12:48:48 (0) ** WBEM_ENABLE
57510 12:48:48 (0) ** WBEM_METHOD_EXECUTE
57511 12:48:48 (0) ** WBEM_REMOTE_ACCESS
57512 12:48:48 (0) **
57513 12:48:48 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
57514 12:48:48 (0) ** Removing default security will cause some operations to fail!
57515 12:48:48 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
57516 12:48:48 (0) ** For WMI namespaces, this can be done with 'WMIMGMT.MSC'.
57517 12:48:48 (0) **
57518 12:48:48 (0) ** WMI namespace security for 'ROOT/RSOP':