The Pennsylvania Department of Transportation has CAD standards for linetypes when submitting to their office. They offer the standards for use with Microstation. Does anyone have a source for these standards for use with Autocad ? probably in the form of a .lin file.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Department of Transportation Linetypres
- Thread starter MMINC
- Start date
TCARPENTER
Programmer
Hmmm....
I'm not sure you'll find exactly the Pennsylvania DOT line types but you may try these guys:
If you haven't tried yet, you may post your question over on the Autodesk forums - someone over there may have what you need.
Short of that, creating the line types isn't too difficult in AutoCAD. Between the help files, and cracking open a .lin file, you should be able to figure it out.
HTH
Todd
I'm not sure you'll find exactly the Pennsylvania DOT line types but you may try these guys:
If you haven't tried yet, you may post your question over on the Autodesk forums - someone over there may have what you need.
Short of that, creating the line types isn't too difficult in AutoCAD. Between the help files, and cracking open a .lin file, you should be able to figure it out.
HTH
Todd
- Thread starter
- #3
Thanks Todd
has been a source for me in the past as well, will check there.
I will take your advice and post at Autodesk
I know I could create these line types either manually in the .lin file or express tools but I am told there may be upwards of 60. That's a fair amount of work
has been a source for me in the past as well, will check there.
I will take your advice and post at Autodesk
I know I could create these line types either manually in the .lin file or express tools but I am told there may be upwards of 60. That's a fair amount of work
TCARPENTER
Programmer
You might also try the guys in the AutoCAD forum over at - tek-tips sister site. There's quite a few civil guys over there too.
HTH
Todd
HTH
Todd
- Status
Similar threads