Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Send IPVoice to a remote site

Send IPVoice to a remote site

Send IPVoice to a remote site

Hi,  I have a CISCO IPCC Enterprise.
 I want to send IPVoice to a remote location.
 Actually, I have a TSUNAMI 10BASE-T 2XE1 Spread spectrum 5.8 GHz Digital Radio. WESTERN DIGITAL. and with this equipment I send  voice and data.
 I use the RJ-45 port (10 MB)on both Tsunamis TO SEND VOICE.
 I have a cisco switch ot the main side and a 3COM in the remote site. Everythin works fine.

 NOW. To send IPVoice I am going to use a cisco switch WS-C3750-24TS in the main office and a
cisco switch WS-C2950T-24 in a remote site.
 I used the following configuration and I could not ping the switch or any other computer IP address.

!(WS-C3750-24TS )
interface FastEthernet1/0/16
 switchport trunk encapsulation dot1q
 switchport mode trunk
 no ip address
 no mdix auto

! (cisco WS-C2950T-24)
interface GigabitEthernet0/1
 switchport mode trunk
 If I connect the switches directly, using a patch cord I can ping each other. But when i use the TSUNAMI I cannot ping.
 Is the configuration correct?
 Is the TSUNAMI equipment a good choice to send IPvoice?
 Is there any other good digital radio equipment that works better to send IP Voice?

 Thanks in advance for your help.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close