×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

How do I swap phone extensions?

How do I swap phone extensions?

How do I swap phone extensions?

(OP)
Two employees want to switch cubes and I need to know how to swap their phones as well. Is there an easy solution?

We have a Nortel Norstar Modular ICS 4.0 System.

Thanks!

RE: How do I swap phone extensions?

I`m not sure how familiar you are with programming but here goes. It`s not that easy if you`re not familiar. I am going by memory, but you can give it a try if you like. Before you try my steps, you could just try swapping the phones and see if the extensions move with them. If it doesn`t move them back and try the following steps.

From a 7310 or 7324 telephone follow the following steps

Feature **266344
Password 266344

It will come up Terminals and Sets

Three (4, once you enter a heading) buttons light up.
Hit the bottom right button of the three thats lit up (next) until you get to system programming. Hit the top right button (show). Hit the bottom right one until you get to feature settings. Hit the top right button. Hit the bottom right button until you get to set relocate. If it is set to Y (yes) release and swap your phones. If its set to N change it to Y and release. If at any time you get to somewhere that doesn`t seem to match my steps, release and try again. You can really mess up your system if you go into this area that is designated for installers. If it doesn`t work the second time, let me know and I`ll repeat it with the manual in front of me.

Set relocate enables phones that you move around to carry the extension and programming along with it. Good luck.

Schlum

RE: How do I swap phone extensions?

The best way would be to re-run the jumpers at the system.
You can turn on dn swapping and or do a dn change. This makes trouble shooting harder for a non experience technician. Be careful and make notes on all changes.

Jeter@LasVegas.com
J.Fisher CCNA

RE: How do I swap phone extensions?

(OP)
Thanks for the help!  Schlum's memory is right on. I haven't tried jeter's solution yet.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close