Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Night Service Call Forwarding
- Thread starter grumpfish
- Start date
- Thread starter
- #4
Hi
OK the meridian will not let you leave a message in a mailbox after call forward has been activated, it reverts back to the originall ext number, so if your calls go to say 0 (switchboard)then you need to create a v/mail account for 0 (zero) and change NIT 1 to your v/mail access number (mine is 7999)
Try that
Colin
OK the meridian will not let you leave a message in a mailbox after call forward has been activated, it reverts back to the originall ext number, so if your calls go to say 0 (switchboard)then you need to create a v/mail account for 0 (zero) and change NIT 1 to your v/mail access number (mine is 7999)
Try that
Colin
Hi
OK the meridian will not let you leave a message in a mailbox after call forward has been activated, it reverts back to the originall ext number, so if your calls go to say 0 (switchboard)then you need to create a v/mail account for 0 (zero) and change NIT 1 to your v/mail access number (mine is 7999)
Try that
Colin
OK the meridian will not let you leave a message in a mailbox after call forward has been activated, it reverts back to the originall ext number, so if your calls go to say 0 (switchboard)then you need to create a v/mail account for 0 (zero) and change NIT 1 to your v/mail access number (mine is 7999)
Try that
Colin
Try using the night idc tables in ld 49 to convert to a no that you would create as a either a phantom ext cfw to a vmailbox, or maybe an ann serv or menu sevice you could acd q the call or default as an unused no to att which would then rcv nite treatment,you could also use various tod schedules
- Thread starter
- #8
- Thread starter
- #9
- Thread starter
- #11
Normally 7000, but when this is set the call gets this extention does not subscribe to voicemail for all extension with no mailbox. What I'm trying to do is to forward all calls at night to one mailbox. The company has 300 DDI numbers but only 5 have mailboxes.
- Thread starter
- #13
Hi
Well i have never done this without a ATT console being present,,, not to sure how to proceed,, my thinking is maybe a day IDC table and a night IDC table with a key programmed to DRC on a set to toggle between them, but this is not a good solution, if you have people working late they will not see any calls if night service is running..all this is no good if the DRC key is not set when the last person leaves the building ...I will ponder this, maybe someone else will have a better solution...sorry
Well i have never done this without a ATT console being present,,, not to sure how to proceed,, my thinking is maybe a day IDC table and a night IDC table with a key programmed to DRC on a set to toggle between them, but this is not a good solution, if you have people working late they will not see any calls if night service is running..all this is no good if the DRC key is not set when the last person leaves the building ...I will ponder this, maybe someone else will have a better solution...sorry
- Status
Similar threads
- Locked
- Question