Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

HiPath4000 DEFTM

Status
Not open for further replies.

duta

Technical User
Joined
Sep 21, 2004
Messages
1
Location
US
I activated the traffic measurement in HiPath4000 using AMO commands ADD-DEFTM and CHANGE-DEFTM. How can I get the traffic data that is collected? DISPLAY-DEFTM command only display the status of traffic measurement and there is no such command as OUTPUT-DEFTM.
 
On the 9006 platform COLL begins collection and ACT dumps the data to the RMX port on the system.

You might try one of those and see if they apply. I have no idea which serial port the output would be directed to.
 
hello all..

I'm new user for Siemens PABX ( hi path 4000 v2.0 )
I need help from hi path 4000 expertise to teach and give hi path 4000 command list and how to use it ..

thank you.

jetcomrade-msia-
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top