Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

KX-TA824 Automatic Line Selection

Status
Not open for further replies.
Resintel

Resintel

Technical User
Aug 18, 2006
90
US
I have 2 CO's x 16 Extensions in a residence. ALS is programmed to "Idle" on all extensions - to seize the available line. I noticed the system defaults to CO-2. Is it possible to have the system default to CO-1 without programming it to "Prime"?
 
Sort by date Sort by votes
change the way your lines are entered into the Trunk Grp
 
Upvote 0 Downvote
If you can gents, please detail the steps to achieve both remedies.

Thanks in advance
 
Upvote 0 Downvote
Quickest way is to swap over your incoming lines (no programming)
 
Upvote 0 Downvote
I have to agree with you Trotski. That's exactly what we did today.

Thanks
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

J
  • Locked
  • Question
Panasonic KX-TA824 maintenance console
Replies
2
Views
592
daddybadger
daddybadger
S
  • Locked
  • Question
Have Panasonic KX-TA824 on Win 7 crashes on startup
Replies
0
Views
383
Solarbuddy
S
T
  • Locked
  • Question
ISO KX-TA824 programming console (KXTAConsole.exe) With Win7 Drivers 1
Replies
3
Views
1K
Wanet Telecoms Ltd
Wanet Telecoms Ltd
quazimotto
  • Locked
  • Question
IP Line between 2 KX-TDE600s 2
Replies
14
Views
2K
quazimotto
quazimotto
Jim Walsh
  • Locked
  • Question
KX-TA824 programming
Replies
1
Views
749
omonat
omonat

Part and Inventory Search

Sponsor

Back
Top