×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Help configuring DISA

Help configuring DISA

Help configuring DISA

(OP)
I have a client with a KXTA-624 v5 hooked to a TVA50. I have also setup a Grandstream VoIP gateway hooked up to CO4, which he uses for international calling. This works fine but now he wants it configured so that he can call into the system from his cell, choose a hidden option from the TVA'a AA  menu (lets use 7), enter a 4 digit PIN code, which will then give him access to the system to then dial out on CO4. I've been trying different things and cannot get this to work. After beating my head against the wall I came across this yesterday in the KX-TVA50 console help file:
----------------
2.2.7 Call Transfer to Outside
Description
Enables the VPS to transfer a call to a trunk (CO line) from the following services:
–Custom Service
–Call Transfer Service
–Personal Custom Service
–Caller ID Callback

Conditions
•This feature is not supported when the PBX cannot transfer incoming trunk (CO line) calls to a trunk (CO line). The following PBXs do not support this feature:
–KX-TA624
–KX-TDA/KX-TAW series (MPR Version 1.1 or later is required.)
------------------------

Question: Does this ring true to those of you that have worked with the TA624's--that is not doable?

If you think it's doable, please enlighten me or better yet, provide a link where I can reach you. I didn't make much on this job but it's worth $50 if you can help me get this working just to get it outta my head!
Thanks,
Mark

RE: Help configuring DISA

it still can't be done properly

RE: Help configuring DISA

The ficher can be done with a disa cart and a analogue port.

The call have to be anwser buy the disa, use the number for the trunk grp access (80x) and dial 9+number.



The analogue port (extension) is brige directly to the co line.
The extension have to be restriction and the line butted in a grp(80x). And give the disa acces to dial out.

RE: Help configuring DISA

Oups the extension is for internal ficher as paging and more

Buth the disa have to anwser for the option to dial out.
It's working

RE: Help configuring DISA

ficher were you school go

RE: Help configuring DISA

you dont like my anglais

RE: Help configuring DISA

Some clown answered this question in PBXinfo.com.

It's not likely that you will like it.

LkEErie

RE: Help configuring DISA

(OP)
Regarding my original question, would the newer KX-TA824 system allow for an inbound caller to access another CO line--using it's built in DISA or in conjunction with the TVA50's auto attendant? While it is creative solution, I'd prefer to avoid the loop around method suggested elsewhere.
If the 824 will do it, we'll upgrade and dump the 624 on EBay. Oh, anybody know if I can use the Gate/Door phone module from the 624 in the newer 824?
Thanks,

RE: Help configuring DISA

No,No And No

RE: Help configuring DISA

(OP)
So what does it take with a Panasonic system to provide international dialtone to an outside salesperson?
How about being able to call from the outside and access an internal extension set to auto-answer that's hooked up to an external overhead paging system? It works fine from internal extension with the 624, but couldn't figure out how to do it by calling in from off premise.
Will an 824 be able to let a admin assistant put a call on hold to grab a second inbound call? Right now, with the 624, it just goes straight to VM--even though I've got call waiting active on her extension (101). Thanks for any suggestions/references.

    

RE: Help configuring DISA

get on the phone and get in the queue for non dealers....

RE: Help configuring DISA

(OP)
I didn't know that this was a dealers only forum.

RE: Help configuring DISA

I didn't say it was its just you are trying to do a lot with the cheapest thing that they make/made,not to mention a discontinued item....so vent to them.
theres a box called the ultimate call handler allows you to
dial out with 3 way calling unplug the POS
624 and plug your lines into it when you leave the house or buy a phone card????

RE: Help configuring DISA

Upgrade to a TDA/TDE

RE: Help configuring DISA

(OP)
Thanks,
Are you saying that a TDA or TDE system will allow me access through DISA to do the following:
1. Dial an internal extension set to auto answer--this is connected through the headset jack to the whole house paging system.
2. Call into the system and access another CO line--this is to be able to call in from on the road and dial out to international #'s through a VoIP FXO gateway connected to another CO line.
3. Set the system up so that if the admin assistant is on one line and  a call comes in, she can put the 1st on hold and answer the 2nd call--right now, it instantly goes to the TVA50 voicemail.
Any other gottcha's with these systems? Can I still use the 77XX phones?

RE: Help configuring DISA

so give your client the number of a certified
dealer !!

RE: Help configuring DISA

Yes to all of your questions IF you get it programmed correctly see your local Panasonic dealer it will save you time and money to get it right the first time

RE: Help configuring DISA

you probably won't need the grandstream if you do the TDE

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close