×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

F9600 and Cisco Unity 5

F9600 and Cisco Unity 5

F9600 and Cisco Unity 5

(OP)
Does anyone know what requirement(s)to get Fujitsu F9600 to work with Cisco Unity 5?

RE: F9600 and Cisco Unity 5

Cisco has a setup document, all you need to do is google it!

RE: F9600 and Cisco Unity 5

In this example several number ranges are routed from the PSTN to the Fujitsu F9600 to the Cisco Call Manager. At this site the F9600 supports 10,000 DID numbers and 17 Fujitsu Integrated Private Network (FIPN) sites and approximately 5000 users.
It supports Name and Number delivery between the two systems.  
Incoming PSTN calls tandem through the F9600 to the CCM.  CCM PSTN calls tandem back through the F9600 to the PSTN.

*** Note the Fujitsu PBX must have the following software to use the DMS100 protocol or the NI1/NI2 protocol to a Cisco Call Manager.
IPRCBS – ISDN Primary Rate Central Office Basic Service.  

**** The following hardware is required on the Fujitsu F9600 system
1- BPTKCA, 1-B2DK2B plus the associated cables or 1-BPTKEA plus the associated cables.
See the Circuit Card guide for further details.

Build two trunk groups for the ISDN service, one is for B-channels and one is for the D-channel.
# TRUNK GROUP DATA LIST #                  

    TGN   TYP TID TNN SPC AKI COF TLT DGN RGN COS RSM FRL TRS HNT       NAME
        AKW AKR AKB RGT AOT GRD REL HKS AFT SHK RHK OPR                DMF
        MIN PRE MAK BRK DGT PST PBO PBF COP PGT                        MID
        PAC MBC STG  DT IAS DTS ABS DTK OOC NOC PTF TCS TCR TDT VCM    OGF
        CRC
        NSF NSFFG PRMFF PRMFV CDNFG TON NPI
(Cisco TIE trunk B channels trunk group)
  500     5  38   0   5   0   0   3   0   1   1   5   7   0   1 'VOIP'
          0   0   0   0   0   0   0   0   0   0   0                      0
          0   0   0   0   0   0   0   0   0   0                          0
         28   0   0   0   0   0   0   0   1  21   0   0   0   0   0

          0     0     0     0     0   0   0
(Cisco TIE trunk D channels trunk group)
  501     5  37   0   4   0   0   0   1   1   1   1   1   0   0 'VOIP'
          0   0   0   0   0   0   0   0   0   0   0                      0
          0   0   0   0   0   0   0   0   0   0                          0
         28   0   0   0   0   0   0   0   0   0   0   0   0   0   0

          0     0     0     0     0   0   0

=>DIS ISINF,500


(PSTN is connected to the Fujitsu F9600, the Cisco CM is behind the Fujitsu. The Fujitsu RX the clocks from PSTN LD circuits and TX this clock to the Cisco CM)
*** Note if the Cisco is in front of the Fujitsu, the DMS100 protocol causes ISDN Information Element errors to the Cisco, therefore use the NI2 protocol instead, this disables Name & Number to/from the Fujitsu.  The error is caused by a status message sent from the Fujitsu that the Cisco does not expect and causes calls to drop)
One other note, the names on the CCM must be all upper case to display properly on the F9600, this may be a character set problem that I have not gotten through yet.

# ISDN TRUNK INFORMATION LIST #            

  # ONE-INTERFACE #

    < D-CHANNEL >

      TNN TGN       EN MS  PRTCL

        0 501 06081800  1 DMS100
(MS=1 Fujitsu is the master of the connection to Cisco, this site uses two ISDN PRI trunks)

    < B-CHANNEL >

      TNN TGN       EN  QDID   FNA SUBDID   DID   UNA   RSS RSASG TYP  NSF

        0 500 06081802    -     -      -     -     -     -      - MUL    0
        0 500 06081803    -     -      -     -     -     -      - MUL    0
        0 500 06081804    -     -      -     -     -     -      - MUL    0
        0 500 06081805    -     -      -     -     -     -      - MUL    0
        0 500 06081806    -     -      -     -     -     -      - MUL    0
        0 500 06081807    -     -      -     -     -     -      - MUL    0
        0 500 06081808    -     -      -     -     -     -      - MUL    0
        0 500 06081809    -     -      -     -     -     -      - MUL    0
        0 500 06081810    -     -      -     -     -     -      - MUL    0
        0 500 06081811    -     -      -     -     -     -      - MUL    0
        0 500 06081812    -     -      -     -     -     -      - MUL    0
        0 500 06081813    -     -      -     -     -     -      - MUL    0
        0 500 06081814    -     -      -     -     -     -      - MUL    0
        0 500 06081815    -     -      -     -     -     -      - MUL    0
        0 500 06081816    -     -      -     -     -     -      - MUL    0
        0 500 06081817    -     -      -     -     -     -      - MUL    0
        0 500 06081818    -     -      -     -     -     -      - MUL    0
        0 500 06081819    -     -      -     -     -     -      - MUL    0
        0 500 06081820    -     -      -     -     -     -      - MUL    0
        0 500 06081821    -     -      -     -     -     -      - MUL    0
        0 500 06081822    -     -      -     -     -     -      - MUL    0
        0 500 06081823    -     -      -     -     -     -      - MUL    0
        0 500 06081824    -     -      -     -     -     -      - MUL    0

    < CBC GROUP TGN >

      PILOT  MTGN - NSF  MTGN - NSF  MTGN - NSF  MTGN - NSF

      NONE

  # ONE-INTERFACE #

    < D-CHANNEL >

      TNN TGN       EN MS  PRTCL

        0 501 06161600  1 DMS100

    < B-CHANNEL >

      TNN TGN       EN  QDID   FNA SUBDID   DID   UNA   RSS RSASG TYP  NSF

        0 500 06161602    -     -      -     -     -     -      - MUL    0
        0 500 06161603    -     -      -     -     -     -      - MUL    0
        0 500 06161604    -     -      -     -     -     -      - MUL    0
        0 500 06161605    -     -      -     -     -     -      - MUL    0
        0 500 06161606    -     -      -     -     -     -      - MUL    0
        0 500 06161607    -     -      -     -     -     -      - MUL    0
        0 500 06161608    -     -      -     -     -     -      - MUL    0
        0 500 06161609    -     -      -     -     -     -      - MUL    0
        0 500 06161610    -     -      -     -     -     -      - MUL    0
        0 500 06161611    -     -      -     -     -     -      - MUL    0
        0 500 06161612    -     -      -     -     -     -      - MUL    0
        0 500 06161613    -     -      -     -     -     -      - MUL    0
        0 500 06161614    -     -      -     -     -     -      - MUL    0
        0 500 06161615    -     -      -     -     -     -      - MUL    0
        0 500 06161616    -     -      -     -     -     -      - MUL    0
        0 500 06161617    -     -      -     -     -     -      - MUL    0
        0 500 06161618    -     -      -     -     -     -      - MUL    0
        0 500 06161619    -     -      -     -     -     -      - MUL    0
        0 500 06161620    -     -      -     -     -     -      - MUL    0
        0 500 06161621    -     -      -     -     -     -      - MUL    0
        0 500 06161622    -     -      -     -     -     -      - MUL    0
        0 500 06161623    -     -      -     -     -     -      - MUL    0
        0 500 06161624    -     -      -     -     -     -      - MUL    0

    < CBC GROUP TGN >

      PILOT  MTGN - NSF  MTGN - NSF  MTGN - NSF  MTGN - NSF

      NONE

=>DIS SVP,2,67 (This service parameter will cause the F9600 to pass the AAR access code to the next node)
  # SERVICE LIST #
    TYPE = 2 ( SVSDT )
    ID-----DATA
    67        1
 

=>DIS NP,,,308
(Example of a number that belongs to the Cisco, all Fujitsu numbering/dialing plans are displayed)
****Note this access code can also be created as a TIE trunk access code (FNO 512~767).  
Remember to add the FNO to the Class of Service assignments).
This implementation uses AAR access codes.  By use of AAR, an ARS route is used to send the calling party name.

# NUMBERING PLAN LIST #                    

 TNN= 0

  TTID= 0 (General dial plan)

    DIGIT  EDL  FNO  TGN  TGX  AJC  RDD  DOC  TTN     DN  SVN

   308       5  304    0              3         0

  TTID= 1 (Hook flash dial plan)

    DIGIT  EDL  FNO  TGN  TGX  AJC  RDD  DOC  TTN     DN  SVN

   308       5  304    0              3         0

  TTID= 4 (Attendant console dial plan)

    DIGIT  EDL  FNO  TGN  TGX  AJC  RDD  DOC  TTN     DN  SVN

   308       5  304    0              3         0

  TTID= 7 (TIE trunk dial plan)

    DIGIT  EDL  FNO  TGN  TGX  AJC  RDD  DOC  TTN     DN  SVN

   308       5  304    0              3         0

  TTID= 8 (CO trunk dial plan)

    DIGIT  EDL  FNO  TGN  TGX  AJC  RDD  DOC  TTN     DN  SVN

   308       5  304    0              3         0


=>DIS AARLC,,308
(Automatic Alternate Route location code table for 308XX)

# AAR LOCATION CODE LIST #                 

  TNN   CODE XLC ARSTB EDL   CODE XLC ARSTB EDL   CODE XLC ARSTB EDL

    0    308       500   5

 

=>DIS ARSR,500
(Automatic Route Selection for access code 308XX)

# ARS ROUTE TABLE LIST #                   

   ARSTB   TNN  POS  TGN  FRL  PTNNO  T0 T1 T2 T3 T4 T5 T6 T7  LARF  CMPF
 (NARSTB)               CDNFG    TON NPI  NAMF

     500     0    1  500    0      0   *  *  *  *  *  *  *  *     0     0
                            0      0   0     1 (NAMF used to send the name on this route, and is why AAR is used.)


=>DIS SVP,2,180 (Service parameters that effect Name & Number on tandem calls)

# SERVICE LIST #                           

  TYPE =  2 ( SVSDT )

     ID-----DATA    ID-----DATA    ID-----DATA    ID-----DATA    ID-----DATA

180    1 (Enable DMS100 Name display)

(Other service parameters in Group 2)

217 Calling party number to PRI-CO when     00:* Station calling line ID
        TLTYP is TIE                01: Station DN (ISSLC + DN)
218 Calling party number when connecting    00:* Not provided
        from PRI-TIE or PRI-CO to PRI-CO    01: Provided
222 Waiting trunk information display for call    00:* ‘OUTSIDE CALL’
        waiting                01: Trunk information or calling
       party information
(SVP 2,217= 0 to use the stations CLIST assignment SVP,2,218= 1 to pass through the CLID on a tandem call)
(SVP,2,222=1 to send CLID during call waiting.)

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close