Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
D1232 with conference phone
- Thread starter 19Dave29
- Start date
- Thread starter
- #3
Hi, The conference phone uses 2 wires, i have tried connecting it to pins 3 & 4 on one the jacks in the pbx which i assume to be the analogue connections, but i am not getting a dial tone. (This jack previously had a digital phone attached to it.) Do i need to reprogam the pbx to allow an analogue connection through this jack?
Since you spell "analog" funny, are you using a TD1232 American switch or a 1232E switch?
You have at least 15 other ports to try the conference phone. I'd try another jack and see if the phone works.
If none of them work, it's probably operator error. If only one jack doesn't work, it's probably programming.
LkEErie
You have at least 15 other ports to try the conference phone. I'd try another jack and see if the phone works.
If none of them work, it's probably operator error. If only one jack doesn't work, it's probably programming.
LkEErie
- Status
Similar threads
