Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to program kx624 ring designation 2

Status
Not open for further replies.
tripdad1

tripdad1

Technical User
Joined
Apr 24, 2007
Messages
1
Location
US
I need to program kx624 to have one of the co's to ring on only one of the extensions. Need company line only to ring on office phone kx7736. Programmed 824 with laptop figured it out then, but i forget how to do it with display phones on older models. Any help would be appreciated.
 
Sort by date Sort by votes
CO doesn't stand for company.

It's in the manual. The program is in the 400's.

Good luck.

LkEErie
 
Upvote 0 Downvote
go into program mode ,sys prgm No. 400 (day in CO)and set the extn that you wish to ring, on a CO basis.
 
Upvote 0 Downvote
to get into program mode press "program + *#1234"
then 405 or 408 (DAY CO IN )
 
Upvote 0 Downvote
sorry got the Prog No. wrong I haven't programmed one of theses for a couple of years, Munja is right *#1234 is the default password for SYS prog mode
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Justin RSU34
  • Locked
  • Question Question
NS700, ring tones?
Replies
2
Views
604
kizo
kizo
N
  • Locked
  • Question Question
NS700 Display CID When Set to No Ring
Replies
0
Views
492
novurania
N
B
  • Question Question
NS700/NS1000 How to make SIP work over Starlink
Replies
4
Views
207
bs_stkr02
B
Justin RSU34
  • Locked
  • Question Question
Have a different phone ring after hours, NS700
Replies
12
Views
1K
Justin RSU34
Justin RSU34
George_H
  • Locked
  • Question Question
Ring Count before transfer to voice mail
Replies
6
Views
716
Ired
Ired

Part and Inventory Search

Sponsor

Back
Top