I can hook to a server through Remote desktop and print Approach reports fine - but cannot print reports when on the server - This happens with one Approach file - all other Approach files on the server print fine from both the server and Remote Desktop - Any suggestions ? Using Approach 9.8.1 and XP Professional -
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Printing to network printer
- Thread starter motnotrub
- Start date
- Thread starter
- #3
Thanks for the reply -
I had the problem wrong -- When I open a particular APR file directly it works and prints fine - but when I open it from another file with an "open" macro it won't print at all - It acts like it wants to print but just hangs up - Any ideas ??
I had the problem wrong -- When I open a particular APR file directly it works and prints fine - but when I open it from another file with an "open" macro it won't print at all - It acts like it wants to print but just hangs up - Any ideas ??
I do not see any difference between opening an APR file directly and opening one with a macro. The PRINT operation should not be affected, in my opinion.
You may want to check to see what default printer is being used in the APR with the OPEN in it and see if it is not the same as the one you are trying to print to.
Sue Sloan
You may want to check to see what default printer is being used in the APR with the OPEN in it and see if it is not the same as the one you are trying to print to.
Sue Sloan
- Status
Similar threads
- Locked
- Question