Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

pervasive /lytec issues. (noob)

Status
Not open for further replies.
Pureenergi

Pureenergi

IS-IT--Management
Jan 17, 2007
1
US
pervasive 8.7 ncd lytec 2004 sp3/no sp
please bear with me i an new to DB management but i am not ignorant entirely :O)
i was just contacted by a small doctors office that is using lytec and pervasive. his pc's were seriously in adequate and i fixed that with ram and g band wireless.
however..

they have DB problems. there are two systems both run win xp home.one had pervasive 8.0/lytec no sp, one had pervasive 8.7/lytec 04 sp3.

in somebodys (not i)attempt to update the 8.0 to 8.7 the database was fuxored. lytec now will not load gives an error 1 "error creating database file.. then error 3012 error opening database list.

i got the pervasives to communicate with each other, they wouldnt even do that) but now the newly updated lytec refuses to do anything but show these two errors.

im at a loss and the techs at medipro doesnt like to support lytec 2004 much and have few answers for me.

the office is small and doesnt want to pay the 5 grand+ to update to the newer lytec.

sorry so long but i sure appreciate help and or opinions and much thanks in advance.
 
Sort by date Sort by votes
Hi,

I took this from the Pervasive manual - hope it helps.

Regards,
Tom

3012: Local engine is not accessible to the MicroKernel router
Access to the local engine is not possible because it is not loaded or could not be launched. You can receive this status code if you try to access a local file on a client and you do not have a Workgroup engine installed or if you try to access a local file on a server and the Server engine is not running.

If you have only a server engine installed and your Pervasive Event Log (PVSW.LOG) contains Status Code 3012 warning entries, perform the following steps:

To Turn Off Local Engine support (for clients and workstations only):

Click Start->Programs->Pervasive.SQL V8->Control Center.
Expand Pervasive.SQL V8 Engines and expand the desired database.
Expand Configuration, then expand Client, and click on Access.
In the right hand frame, double-click on Use Local MicroKernel Engine, change the Current value to Off, and click OK.
In the right-hand frame, double-click on Use Remote MicroKernel Engine, change the Current value to On, and click OK.
In the right-hand frame, double-click Target Engine, change Current to Server only, and click OK.
In the left-hand frame, expand Client-16 bit and click on Access.
In the right-hand frame, double-click Use Local MicroKernel Engine, change Current value to Off, and click OK.
Make sure the Use Remote MicroKernel Engine value is set to on and that the remote engine is set to accept remote requests.
Exit the configuration utility and restart the engines for the new settings to take effect.

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

ianbtheog
  • Locked
  • Question
Connection Manager is not running at the specified port number - Pervasive 13.31.014 - Intermittent
Replies
2
Views
545
ianbtheog
ianbtheog
dgillz
  • Locked
  • Question
DDF Builder for Actian fka Pervasive SQL
Replies
3
Views
532
mirtheil
mirtheil
profoundhypnotic
  • Locked
  • Question
How to read a csv file in Pervasive?
Replies
1
Views
578
mirtheil
mirtheil
michellepace
  • Locked
  • Question
Source control for pervasive? (git)
Replies
1
Views
342
mirtheil
mirtheil
Ambientguitar
  • Locked
  • Question
Need help opening a Pervasive Database or BTR files
Replies
3
Views
674
mirtheil
mirtheil

Part and Inventory Search

Sponsor

Back
Top