Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to appliy SP2 to Office 2003 1
- Thread starter Calvy
- Start date
-
1
- #2
skissinger
Programmer
This could be a complex answer. It depends upon how Office 2003 was originally installed; admin point or not?
Check out then +Maintenance, +Updating Users' Office 2003, Distributing Office 2003 Product Updates
Blog:
Check out then +Maintenance, +Updating Users' Office 2003, Distributing Office 2003 Product Updates
Blog:
- Thread starter
- #3
Calvy,
It sounds like Office 2003 was installed from a CD for the image? If that is the case, you can use the SMS ITMU tool to deploy SP2 for Office 2003. Download the ITMU tool from the Microsoft SMS web site.
If you installed it using an admin point, then you must upgrade the admin point then tell your clients to sync with the admin point. If you are not sure what this is then you probably didn't do it this way.
It sounds like Office 2003 was installed from a CD for the image? If that is the case, you can use the SMS ITMU tool to deploy SP2 for Office 2003. Download the ITMU tool from the Microsoft SMS web site.
If you installed it using an admin point, then you must upgrade the admin point then tell your clients to sync with the admin point. If you are not sure what this is then you probably didn't do it this way.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question