Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Trunk-to-trunk Transfer

Status
Not open for further replies.

MikeAzz

Vendor
Joined
Sep 22, 2006
Messages
2
Location
US
When a Norstar is set up for trunk-to-trunk transfer, are the incoming and outgoing trunks (analog) nailed up for the duration of the call? In other words, once the transfer is complete, are the trunks released and the connnection is established in the CO?
 
If you do a link transfer on the co's then your line is freed up. If you do a norstar transfer, both lines are tied up for the length of the call. You better make sure you have disconnect supervision on the lines if you use norstar transfer! The lines will hang if you don't.

When in doubt RTFM (read the friggin manual)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top