Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Unable to show the correct phone number

Unable to show the correct phone number

Unable to show the correct phone number

How do I program the switch to show the phone number of the corporate phone to my cell phone? Before when I use the corporate phone to call my cell phone it’s showing the right number but now it is showing a different number. Worse is its showing a different area code. Thanks for the help.

RE: Unable to show the correct phone number

What system do you have?
What type of lines do you have?

RE: Unable to show the correct phone number

We have Fujitsu F9600 and our lines are digital and analog (for fax only). I'm new with this equipment and when I took over this job there was no proper turn over so most of I've learned are just by reading the three volumes of Fujitsu F9600 Commands Manual Release 10. Thanks for all the help in advance.

RE: Unable to show the correct phone number

When you say "digital and analogue lines" do you mean external lines or extensions?

Digital lines = PRI/T1
Analog lines = PSTN
Digital xtns = Fujitsu system phones
Analog xtns = faxes, cordless phones, POTS/SLT phones

If you have both types of lines, they will have different numbers. Depending on how your LCR/ARS is setup, what you dial will determine which lines they use. You can only specify which number you send when using digital lines.

Sounds like you might have both types of lines. Sometimes when you make a call it will go on the digital line and send a certain number as CLI. Other times it uses the analog lines and send a different number. You need to confirm what lines you have, what type and how many of each. Then check LCR/ARS programming.

RE: Unable to show the correct phone number

We got extension lines.

RE: Unable to show the correct phone number

Hmm, sounds like terms like PRI/T1/PSTN/LCR/ARS etc are above your skill level. Do you have any experience in programming other PBXs?

End users call lines what their phone is connected to. These are actually extensions. Engineers call lines what the PBX is connected to the outside world. This is the correct terminology.

You need to know what sort of "lines" you have and how the LCR/ARS is programmed to route the calls onto the lines. Without being disrespectful it sounds like this might be a little more than you can handle. I could start telling you how to check things like this but if terms like extensions and lines aren't clear to you then the rest wouldn't make a lot of sense.

RE: Unable to show the correct phone number

To set the CLI on ISDN/PRI trunks
ASS CLIL,0,NXXNXXXXXX,1,1 = this sets the default CLID for all phones assigned to Tennant 0
"ASS CLID", is used to create a specific CLID, inwhich you user "ASS CLIST" to assign a station to the CLID.
Find a copy of the Feature Implementation Manual (FIM)

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close