Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

KX-TDA 200 with DXDP

KX-TDA 200 with DXDP

KX-TDA 200 with DXDP

I have a KX-TDA 200 Version 1.06  running with 16 DLC card without MEC Card , question is : " How many Digital XDP ports I can activate on this card ? "

Please help me , thanks !

RE: KX-TDA 200 with DXDP

if you do not have any other Extns you can enable all 16 DXDP

But if you have more than 1 card you will need the MEC

RE: KX-TDA 200 with DXDP

Hello again !
I also have attached in PBX other two extension cards 16SLC and 8SLC . Did you mean on that kind of extension cards ?

Thanks, Damir

RE: KX-TDA 200 with DXDP

yes, the other cards use memory resources however with only
24 SLC extns you should be OK to enable the 16 DXDP but if you add another DLC or a DHLC card you will probably need the MEC card you should also upgrade the software of the TDA to the latest for better performance

RE: KX-TDA 200 with DXDP

Thank you Trotski !

I think that you solved my problem.


RE: KX-TDA 200 with DXDP

Just got back from TDA Certification =)

On the TDA 100 you only need a MEC card if you go beyond 64 extensions whether they are normal or DXDP and 128 on the TDA 200

RE: KX-TDA 200 with DXDP

silly question but when is dxdp even practical other
than when some else is sitting right next to you?

RE: KX-TDA 200 with DXDP

I feel the same cwc3 if you could take it from the 66 block and not have to go through the phone like you can with the SLT XDP then it would be great.

I can see a lot of trouble calls when a users unplugs their phone to clean the desk or something and not plugging them both back in or getting them backwards.

Would probably only use it for a quick fix to get 2 phones next to each other until another wire could be ran or something.

RE: KX-TDA 200 with DXDP

I am on the same wavelength as you cut down duplex jacks
and dual 4 conductor line cords to feed the 17th
phone across the hall not me .... seems like a hassle

RE: KX-TDA 200 with DXDP

You just need to be a bit inventive and manage your customers ie: tell them not to unplug things.

DXDP can sell a Phone system by reducing the number of cards needed for a given set up.

I put a RJ12 plug in the xdp port of the phones and turn the B pair around on to the A pair and wire the Patch Panel so that I can patch the DXDP anywhere within the Stuctured cabling.
I know that you can lose 2 phones if 1 is unplugged but if you warn the customer of this, then this type of setup work well.

RE: KX-TDA 200 with DXDP


RE: KX-TDA 200 with DXDP

You just need to educate the customer

RE: KX-TDA 200 with DXDP

Hello again !

Iam happy that you inetresed for my question,but you forget one thing,that software version 1.06 does not support DXDP , next version 1.1 does support.

Thank you anyway.

Bye Damir

RE: KX-TDA 200 with DXDP

Sorry about that Damir, you should be able to upgrade the software easily

RE: KX-TDA 200 with DXDP

you'd be better  off just puting in another dlc card I could just see you going into "upgrade" a mission critical system and have something go wrong.

RE: KX-TDA 200 with DXDP

Thanks on your advices, I already upgrade my TDA200 with no problems on ver.1.1  .

Bye Damir

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close