Disable alarm ringing when no line is detected...
Disable alarm ringing when no line is detected...
(OP)
Hello, I have a Panasonic PABX KT-TD208E with no line on ( i can not make outgoing calls at all ) , in order to communicate to each other. The problem is that the first analogue exetension rings now and then, i suppose that this is an alarm from the pabx to inform me that it has no outgoing line. Is there any way to disable this alarm??
Thank you in advance.
Thank you in advance.
RE: Disable alarm ringing when no line is detected...
over here the command is
off hook
dial 790
you should here a long tone then hangup
however it may be differnt in the states... one of the lads here will post the code if it is differnt
peter
RE: Disable alarm ringing when no line is detected...
RE: Disable alarm ringing when no line is detected...
thank you very much for your help i tried it and it worked.
Do you know any other tips for this kx-td208e that could help me?
Is there any way to make a call in order to ring to all the extensions?
RE: Disable alarm ringing when no line is detected...
RE: Disable alarm ringing when no line is detected...
i notice you mentioned you dont have any lines on your system.. if you are not using all 6 exts you could loop a unused slt port back to the line position and then setup the day ringing as a type of ring group...
do you have the user manuals all the tips are in it let me know
peter doyle (novacomms.net)
RE: Disable alarm ringing when no line is detected...
RE: Disable alarm ringing when no line is detected...
Do you now if there is a manual for this model in order not to bother you? Or if there is a programmator software?
RE: Disable alarm ringing when no line is detected...
RE: Disable alarm ringing when no line is detected...
sorry about the 206 bit our version only has 6 exts i somtimes get confused.must be showing my age....
peter (www.novacomms.net)
RE: Disable alarm ringing when no line is detected...