TDA forced outgoing line
TDA forced outgoing line
(OP)
I have a few isdn lines connected to my TDA.
I want some extensions to always dial over a surtan line without selecting the trunk group with 801, 802, etc..
for example:
when extension 201 dials a 0 for a outgoing line it should use ISDN line 1
when extension 212 dials a 0 for a outgoing line it should use ISDN line 2
Now we can do this by dialing 801 or 802 in stead of the 0.
Is it possible to force some extension over a preferd line?
Martin
I want some extensions to always dial over a surtan line without selecting the trunk group with 801, 802, etc..
for example:
when extension 201 dials a 0 for a outgoing line it should use ISDN line 1
when extension 212 dials a 0 for a outgoing line it should use ISDN line 2
Now we can do this by dialing 801 or 802 in stead of the 0.
Is it possible to force some extension over a preferd line?
Martin
RE: TDA forced outgoing line
then set the class of service to only have outgoing access to the trunk group of groups you want'its v/easy stuff with the software
peter