×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

KXTDA 30 - DID to analogue sets

KXTDA 30 - DID to analogue sets

KXTDA 30 - DID to analogue sets

(OP)
I have a Panasonic KXTDA 30 with Caller ID installed, there is two CID cards in the system , one mounts as a
daughter board on the trunk board and provide CID to the Keysets, Tapi and SMDR.
 
The second board mounts in a slot to the right of the trunk board and provides CID to SLT sets.
 
Problem - the CID to the SLT sets does not work.
 
1) CID is on the trunk and displays on SMDR, Tapi and Keysets
2) If I unplug the SLT and put it on the analogue line ie direct to PSTN - the caller ID displays perfectly .
3) The CID card shows in the programming software as "EXT-CID" slot 8.
4) The SLT is on port 3 (ext 203) - this is the only device plugged into that port.
 
 
Any Ideas anyone?
 
Also any recommendations on TAPI software?
 
 

RE: KXTDA 30 - DID to analogue sets

so to recap you have a LCO4 with a caller id card on it
you have the DHLC that came in the system you have a ext caller id card in a option slot and thats it

what do you have in extension caller id recource 1- ?
in system settings?

RE: KXTDA 30 - DID to analogue sets

(OP)
Yes we have an LOC4  with a CID card on it, this is the card that transmits the CID to SMDR/Keysets TAPI etc.
ECID  extension caller id recource 1=Slot 01:DHLC4.

 

RE: KXTDA 30 - DID to analogue sets

I know this is silly ? is 203 in the ringing icd grp?
also is xdp set does it ring up as 203 ? have you put a
butset accross the ext in monitor to hear if there
is any fsk comming down between rings?

RE: KXTDA 30 - DID to analogue sets

(OP)
Not at all silly - yes the phone rings.

I have solved it though, there is a setting in Ext Settings, page 7, Extn CID sending, enable - and the CID works for the incoming CID - reverse logic to me.

I went through each setting and one by one , turned on every feature and tested again.

I did this on day 1, but I was looking for Incoming CID settings as oposed to sending from the set.

This can be tested really easy, call from a keyset intercom and if the name comes up on the SLT - it will work and does for external generated CID.

Many thanks for all your help.

Regards Paul








RE: KXTDA 30 - DID to analogue sets

thats funny by default that should have already been set
that way . I loaded the 30's maint console here for
with a default database for your benefit, we don't have the 30 here but looks identical
to our 50!!

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close