×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

bleed settings

bleed settings

bleed settings

(OP)
Please offer me a clear and simple explanation of how to get an image to print all the way to the edge of the paper on a desktop inkjet or laser printer.

I've not succeeded with any combination of margins, bleeds or image placement inside of InDesign thru to the pdf export. (http://www.adhesive101.com/bleed_test.pdf).

I think, now, that the bleed settings only work in a press environment that expects to cut the page to size.

So this must be a printer setting and off I go to Google - to learn that printers have limitations in this regard and, without digging out the specific manual, I will assume my $100 printer is probably not up to task, and may never be.

That's the story and now my question is:

must i accept margins on documents printed on desktop printers?
if no, then what is the expected price range of printer that could do that?
or - is that why we'll always have print shops?

Thanks for your consideration - all ideas welcome!

Regards,
yamy

RE: bleed settings

It sounds to me like the problem is your printer and there is nothing that In Design can do. Perhaps this is not the correct forum for this type of post? If you are looking at the expected price range of printers, I am sure that doing some shopping around and asking some specialists would not be a bad idea.

RE: bleed settings

Sometimes we have requirement to produce pages without white color at the edges. If there is no set page size you can simply cut outer borders and have image covering "whole" page. Another technique works if A4 size is mandatory. Just use A3 printer (and paper) and compensate for dimensions of margins and of course cut it down to A4.

RE: bleed settings

(OP)
thanks for confirming that the printer is the problem, not the software.

we'll adjust our designs accordingly.

RE: bleed settings

yamy

I work as an inhouse GD and on the form they must fill in when they request a job is the question (among others) - how many copies? If it is under 500, then the form explains that there will be a minimum of a 10mm margin on all sides on their printed piece. Inhouse printing is done on a Canon CLC 1100 (over $25K worth of laser printer) and even it has a non-printing margin on one edge of 9mm (others are less than 5mm). So I design accordingly. Of course, I don't tell them that they *could* have their A4 page printed right to the edge if it was printed on A3 paper and someone (but NOT ME) was prepared to trim them all down to size.

Over 500 copies are too expensive to print inhouse and are sent out to printshops, for which the originator can have bleed on as many sides as they want (I allow 3mm all sides). The prinshop has a big guillotine which can cut 100s of sheets of paper extremely accurately. Because even presses have to have enough room to 'grip' the paper as it passes through, and the excess must be trimmed off.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close