×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

KX-TD1232 - Msg waiting lamp & prog CO button set for msg waiting

KX-TD1232 - Msg waiting lamp & prog CO button set for msg waiting

KX-TD1232 - Msg waiting lamp & prog CO button set for msg waiting

(OP)
I have a customer with a KX-TD1232 mated with a TVS-50 and I'd like to set up the dedicated message waiting lamp on each individual's telephone for their personal mailbox notification, and a flexible CO button on each for a general mailbox.  I can't seem to get the flexible buttons to accept a mailbox other than the extension owner's.  Can this be done?

RE: KX-TD1232 - Msg waiting lamp & prog CO button set for msg waiting

depends what revision ksu do you have what
are you using for a programing utility?

RE: KX-TD1232 - Msg waiting lamp & prog CO button set for msg waiting

(OP)
I'm using the old programator program, but I also tried setting the flex co using the system admin phone.  It seems that the system will only allow you to program a flex co to the extension owner's box(obviously a provision for phones without a dedicated msg light).  The book talks about extra parameters (i.e. other extension) but I could'nt get it to accept anything but the msg lamp function selection.

RE: KX-TD1232 - Msg waiting lamp & prog CO button set for msg waiting

if the ksu is 8 years old you have a very old rev
most likley  need -4 or higher to have others MWL
on your extension!

RE: KX-TD1232 - Msg waiting lamp & prog CO button set for msg waiting

also if you have a -4 you can only assign other
exts message waiting lights flexable buttons  through field 005 on jack one.

I would not use programator at all!can cause more harm than
good.

RE: KX-TD1232 - Msg waiting lamp & prog CO button set for msg waiting

(OP)
I'll check the rev level on the KSU.  Thanks very much for your help.  Suggestions on better programmer that's reasonably priced?

RE: KX-TD1232 - Msg waiting lamp & prog CO button set for msg waiting

sorry can not help you there the TD is still a closed
system and software belongs to panasonic.

RE: KX-TD1232 - Msg waiting lamp & prog CO button set for msg waiting

(OP)
Checked KSU and it's a -5. I can select field 005 and assign "message waiting" to the button of my choice, but the system won't allow any additional parameters (i.e. extension).  Thoughts now?

RE: KX-TD1232 - Msg waiting lamp & prog CO button set for msg waiting

I have a -4 here and all i have to do is go to
jack one get into programing field 005 speaker -jack number enter jack 05
button 3 MW- shows on the screen key in a 3 digit number
and hit auto dial/ store wala if that doesn't work it's
not a -5!

RE: KX-TD1232 - Msg waiting lamp & prog CO button set for msg waiting

(OP)
Sorry, I didn't have the right info on version.  Full ROM version number is P231A70613A.

RE: KX-TD1232 - Msg waiting lamp & prog CO button set for msg waiting

is a -2 or a low 3

RE: KX-TD1232 - Msg waiting lamp & prog CO button set for msg waiting

(OP)
I suppose upgrading the systems takes a bunch more than just swapping out the eproms?

RE: KX-TD1232 - Msg waiting lamp & prog CO button set for msg waiting

i think just eproms to a -4

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close