Connecting 11C to 61C using call pilot voice mail

not a problem, only real step is to network the swtiches via pri.. once that is done build the voice mail boxes in the call pilot.. lamps and all other features work like a champ.. your call pilot does not know or care which campus the set is on... on the opt 11 side each set needs to have the fdn hunt target and the mwi matched to the sets in the 61.. i wouldn't try and build a work around, if it's over a hundred sets or so i would build a script to make the changes.. other wise just waste a day and get it done.. if you need the config for the pri on either end, request it in the merridian forum and one of us can post it. or i can post it here, unless you do not have pri yet it;s a non issue

john poole
bellsouth business
columbia,sc

Also check to be sure you have the appropriate packages in your PBX and the Call Pilot to do NMS, unless lights won't light!!

Thank you all for your help. I understand what your saying. I have the tie line alrady programmed and the connection is there all I have remaining is to make changes to the phones as you said pointing them to the mwi FDN and then building them on the call pilot.

Thanks again,

You said you have a TIE Line but, but the PBX are in Network?