Fax Problem
Fax Problem
(OP)
I am trying to setup the fax sending feature using the Nortel Fax Driver. The user is able to send a fax to a local mailbox using m3333. However anything external to their location will not work.
I have checked the RPL list, the NCOS level on the ports which is set to international. The dialing defaults have been filled in with the proper info....
I am at a loss. I however have the following bounceback ....
Your message did not reach some or all of the intended recipients
Subject: test
Date: Wed, 12 Apr 2006 15:40:50 -0400 (Eastern Daylight Time)
The following recipient(s) could not be reached:
"Unknown" <VPIM=FAX=9664290/CALLPILOT2@callpilot2>
Reason: An outgoing connection could not be made with the destination. Please try sending the message later. (22)
Can someone help?
I have checked the RPL list, the NCOS level on the ports which is set to international. The dialing defaults have been filled in with the proper info....
I am at a loss. I however have the following bounceback ....
Your message did not reach some or all of the intended recipients
Subject: test
Date: Wed, 12 Apr 2006 15:40:50 -0400 (Eastern Daylight Time)
The following recipient(s) could not be reached:
"Unknown" <VPIM=FAX=9664290/CALLPILOT2@callpilot2>
Reason: An outgoing connection could not be made with the destination. Please try sending the message later. (22)
Can someone help?
RE: Fax Problem
RE: Fax Problem
RE: Fax Problem
RE: Fax Problem