Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Vodavi Telenium with Predictive Dialer

Status
Not open for further replies.
Joined
May 24, 2004
Messages
3
Location
US
Has anyone connected a predictive dialer to a Telenium via a simulated T-1 connection from the Predictive Dialer to the Telenium T-1 card. They have a MIFMe module, and two existing PRI's besides this one T-1. I have the system working great, just want to know before I connect this if anyone has ever really done this with a Telenium and a Predictive Dialer. Any possible areas of concern I should be ready for? Thanks for any insight!!
 
We are selling quite a few VODAVI Teleniums (or IPECS)in our country. We have not yet installed any PC applications except the softphone.
I could imagine that your predicive dialer should run with TAPI? Or maybe you will run it directly with T1.
If your application (predicive dialer) runs on a PC, it is important to have the same grounding for both the Telenium and the PC.
Hope that this info can be useful for you.
///doktor
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top