Host PABX access
Host PABX access
(OP)
G'day all,
We are planning to put Panasonic TES824 behind another TES824 which will be the host PABX.
This second (or new PABX) need to use CO lines that are attached to both PABX's.
The way explained in the manual to access host pabx co line is pressing,
automatic CO line access number (9) -> Host pabx access code
Since the automatic CO line access number(9) is used to access the host PABX, will it be possible to access CO lines attached to this new PABX by pressing the same automatic line access number (9)?
We are planning to put Panasonic TES824 behind another TES824 which will be the host PABX.
This second (or new PABX) need to use CO lines that are attached to both PABX's.
The way explained in the manual to access host pabx co line is pressing,
automatic CO line access number (9) -> Host pabx access code
Since the automatic CO line access number(9) is used to access the host PABX, will it be possible to access CO lines attached to this new PABX by pressing the same automatic line access number (9)?
RE: Host PABX access
RE: Host PABX access
then I configured those CO which going to the host pabx with host pabx access number (9) which should be the automatic CO line access number of the host PABX.
but i am unable to get the dial tone by pressing 88--9 but able to get 88-81 (up to 88 for each co line of the host pabx). here I am using --88 81 .
according to the manual I should be abe to access host pabx CO by pressing 88 then 9. any thing I have missed?
help highly appriciated..
RE: Host PABX access
will have to do is pickup the phone and wait for an outside
line from host pbx.
RE: Host PABX access
RE: Host PABX access
RE: Host PABX access
you can do pickup dial with the ta also....
RE: Host PABX access
RE: Host PABX access
RE: Host PABX access
RE: Host PABX access
RE: Host PABX access
RE: Host PABX access
RE: Host PABX access
RE: Host PABX access
RE: Host PABX access
IE: I pick up ext 110, I get ICM. I dial 9 I hear dialtone. I dil 555-1212 and it dials 9,555-1212 on the Cenrex trunk in the first avaialble trunk (1-6).
Thanks
RE: Host PABX access
RE: Host PABX access
RE: Host PABX access
an ars table I say set it up test it and see if it works
RE: Host PABX access
Pick up dial won't do exactly what you want, because it will a) make it annoying for you to use the intercom functions, and b) I think you want to remove the CENTREX 9 instead of the Panasonic 9.
Pick up dial.. IIRC, system program #204 (or is it 240?) ... around there somewhere anyhow. "PICKUP DIAL" is actually the dial timeout. The shortest you can set is one second. This means that you have one second to dial an intercom function, or it will dial out whatever number you've programmed.
Intercom functions 740 and 741 toggle pickup dialing off or on. 742 sets the number to dial, just like call forwarding (ie 7429# would set the pickup dial string to "9").
IMNSHO, pickup dialing is only useful for hotline phones. You know, like the red ones where you shout, "Get me the President!".
...let's see. I don't know ARS. If I really wanted this and couldn't convince the centrex folks to pull the 9 (should be able to), I would look at the toll restrictor stuff for modified long-distance dialing. You might be able to fudge something there.
Incidentally, why Centrex AND a PBX?
Oh, one more thing. SLT is panasonic code word for "POTS phone".
Wes
RE: Host PABX access