Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
IP Telephony between Cisco CME and Siemens Hipath 3750 with HG 1500
- Thread starter flanet
- Start date
Silverblade
Technical User
If your cme can handle calls with the qsig protocol it can work. Otherwise i think you can forget it.
I once had a costumer that wanted to connect a siemens to a samsung pabx. The problem was that the samsung only could use real ip protocols (h323) while the hg1500 only can use qsig or cornet on its ip line.
Good luck
I once had a costumer that wanted to connect a siemens to a samsung pabx. The problem was that the samsung only could use real ip protocols (h323) while the hg1500 only can use qsig or cornet on its ip line.
Good luck
- Status