TDA 50 to TDA 50 over Point to Point T1

SpecializedTech · Dec 14, 2005

I'm working on a site. We installed a TDA 50 with a TDA5480 VOIP Gateway Card at each location. The two sites were up and running with the exception of voice quality, when connected over the internet thru dsl. We are in the process of ordering a point to point t1 to connect the two sites. Is there any additional equipment needed to make everything work thru the t1.

cwc3 · Dec 15, 2005

an adtran ace on each end

SpecializedTech · Dec 15, 2005

With the Adtarn Ace, are there any special settings that need to be used to have them communicate between the two sites.

SYQUEST · Dec 15, 2005

You need to set the parameters of the Adtran CSU to match the specs of the DS1 ordered and the Panasonic TDA50 configuration.

READ the documentation that comes with the unit and follow the instructions.

Hope this helps!

....JIM....

SpecializedTech · Dec 15, 2005

I was supplied with two Netopia Routers to connect the two sites and have them see eachother. I follow the directions for logging into the routers, but was unsuccessfull. Is there any other software I may need to use, any help is greatly appreciated.

cwc3 · Dec 16, 2005

most are browser based what does your docs say!

Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

TDA 50 to TDA 50 over Point to Point T1

SpecializedTech

Technical User

cwc3

Vendor

SpecializedTech

Technical User

SYQUEST

Technical User

SpecializedTech

Technical User

cwc3

Vendor

Similar threads

Part and Inventory Search

Sponsor