Its not released in oz till late november.  And as stock levels go we probably won't be able to get any until late jan...

Played around with the software a bit though...nothing special really.  Apparently the maintenance consoles for the 30 and 100/200 will be changed over to look like the 600 console..

Just noticed that in the manual the part numbers for the cabinets are different than the TDA100/200 but the cards seem to be the same. Programming seems the same apart from the icons look like the new 824/308 programming tool.

15 days till installation

11 what country are you in?

Most of the cards are the same.  There are a couple that aren't.  I think the ECHO card is a new card for the 600.  On the 100/200 it mounted on the OPB, the manual sorta says it'll now take a slot.  There were a few others that were different as well.  LCOT's were different too I think..

It contain same features as KX-TDA100/200 Ver.2.01
(2005 Aug Mass-production PMPR V2.2201

PDN/SDN function will be supported from the Ver.2.03

They will improve the PC Programming software of
         TDA100/200 to same stile from V2.02.
         And, TDA30 also will improved

(1) Outlook bar style menu
(2) Graphical slot assigning (Drag & Drop operation)
(3) Simplified card and port configuration
(4) Multi-user connection profile management
(5) Change the language w/o re-installation
(6) Multi-window control
(7) Improved Copy & Past operation
(8) Graphical ARS Routing Plan Time table
(9) Import & Export of Extension Number/Name
(10) Copy of the group member list
       (ICDG, VM-DTMF Group, PS Ring Group,
        Broadcasting Group)

RS-232C (COM1, 19200bps, 8bit, Stop1, None )
(b) Analog Modem (COM1, 38400bps, H/W flow control)
(c) USB (USB1.1)
(d) LAN (KX-TDA600 default = port:35300)
(e) ISDN-remote (CAPI2.0 or later, V-CAPI is not supported)
New Card
       - EMPR
          Powerful 32bit CPU(Clock 200MHz, 360MIPS)
           Twice faster than TDA100/200(Clock 133MHz, 170MIPS)
       - EMEC
          Expanding the memory size SRAM(2MB -> 4MB)
       - ESLC16/EMSLC16, ELCOT16
          CPU is used to reduce the load of EMPR
       - EECOH16
          By using the Time Slot for Shelf inter connection
SLC TDA6174
MEC TDA6105 (Memory Expansion Card (EMEC)
MSLC TDA6175
LCOT16 TDA6181
EECHO16n TDA6166
BUS MAster TDA61..

SMDR (W/O EMEC)1000
SMDR (W EMEC)4000
ARS plan=48

...and TVM is on LINUX : ))