Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

KX-TVS200 Password Reset

Status
Not open for further replies.
JNoodle

JNoodle

Technical User
Joined
May 25, 2002
Messages
7
Location
US
Hi,

I'm inheriting a TVS200 system from a previous owner, and I need to reset the system password (or recover it if possible). Does anyone know how to do this? Any help would be greatly appreciated.

 
Sort by date Sort by votes
have you tried to plug in a laptop?
 
Upvote 0 Downvote
I don't have the software for the voicemail system, only for the PBX. So I haven't plugged in a laptop yet. But if the voicemail software is like the PBX software, you have to enter a password prior to accessing it via a data cable.
 
Upvote 0 Downvote
there is no software except for 3rd party stuff

plug in the same cable as the pbx 9 to 25 with null modem adapter set up hyperterminal
up 9600,8.N.1 no flow control hit enter twice the pass word on the
200 is an installer option so you have a 50/50 chance there is no password on it or if it is not mission critcal
and it its yours to keep why would you not dump it!!

 
Upvote 0 Downvote
Well to be more clear, it's a voicemail system in use at a company I'm working at. I can't dump it, and they don't know who setup the password on it previously, so they don't know who to contact. In any case, I have to setup a voicemail box for a user, and I need to reset his voicemail box password also. But I would like to be able to use a 3rd party software to configure the system. Do you know if there's a way to reset the system password?
 
Upvote 0 Downvote
hook up a computer and see it may be all you need to do you have a 50/50 chance that the programing port is not passworded and reset or add mailboxes"just do it"

or you can plug in a direct connect modem and beg panasonic to dial in!!
 
Upvote 0 Downvote
If you don't have the password and there is one on the programing port and boxes 998 + 999 are passworded as well
all the the 3rd party software in the world is not going to help you are SOL!!
 
Upvote 0 Downvote
on the tvp 100 "drowssap" used to bet you in via hyperterminal
 
Upvote 0 Downvote
I've never got that one to work but it worth a try.
 
Upvote 0 Downvote
you can call panasonic tech & show ownership to TVS unit . they have a back door password . you must set-up an modem for panasonic to your TVS unit . had it done few time for us.
 
Upvote 0 Downvote
password backwards won't work on the latest units. Dealer backdoor code was disabled for the last production run of TVP/TVS's
 
Upvote 0 Downvote
yes that is true a picked up a new client was able to crack
the 1232 and wound up dumping the tvs and reprograming it

had a zoom 2836 with me and all and they could not backdoor
the unit
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

zat1
  • Locked
  • Question Question
service manual KX-TCA185 and KX-TCA285
Replies
2
Views
440
zat1
zat1
ChrisBord
  • Locked
  • Question Question
kx-td1232 software
Replies
9
Views
764
ChrisBord
ChrisBord
S
  • Question Question
Panasonic KX-NT546/543
Replies
3
Views
299
Smileincap
S
V
  • Locked
  • Question Question
Panasonic KX-NT680 factory reset and upgrade firmware
Replies
4
Views
1K
EMJP
EMJP
M
  • Locked
  • Question Question
Firmware KX-NT551
Replies
4
Views
710
EMJP
EMJP

Part and Inventory Search

Sponsor

Back
Top