I'm not crazy.....I'm not crazy. I just added a slt (only one on system). Other than trunks, it works fine. I put the trunks in a trunk group '9', set them as pbx, even put the trunks on ff keys for the slt. On that phone or any other, dialing 9 shows 'BUSY'. I looked through all 64 trunks and verified that no other was in trunk group '9' and that none of the chosen trunks were private. - Pete
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Panasonic DBS96 Trunk Group Access
- Thread starter havonasun
- Start date
- Status
