×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

one way audio

one way audio

one way audio

(OP)
I have two 3300 controllers set up with IP trunking. The issue is I am only getting one way audio. I don't even hear ringing. The other end can see the call and answer and hear me.

the scenario includes the fact that we are using a VPN tunnel. Also using different versions of software. Release 5.2.6.8 at the one end and 5.2.4.4 at the other

Any ideas ?

RE: one way audio

make sure that you have got a router setup in the dhcp options form

RE: one way audio

Firstly make sure that you can ping or even connect to the Mitel 3300 system from the remote site, you need to make sure that you have the routing in place.

You also need to have the same software running on both sites, should still work with different software however Mitel will recommend that you have the same.

Check the default gateway of both Mitel's are pointing to the routers that are connected to the VPN.

After all this if you go to the Maintenance command and type in    st xnet all   is it showing that the link has been established?

RE: one way audio

(OP)
all,

Thanks for the replies. The issue was that there was port blocking one way, hence the one way audio.

The firewall engineers rectified their side and voila! we have two way comms.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close