caller id on a vb 42050 caller id on a vb 42050 largemarge (Vendor) (OP) 9 Sep 05 16:50 We are having a problem with caller Id being received and viewed on CO trunks. Is there a specific option tha needs to be optioned on? RE: caller id on a vb 42050 cwc3 (Vendor) 9 Sep 05 18:18 is there a VB-42551 or 52 in the ksu? RE: caller id on a vb 42050 largemarge (Vendor) (OP) 9 Sep 05 19:12 not sure, but wiil check with the tech that was on site. The dialtone provider was changed and for some reason, the system will not read the callerid that is being sent. RE: caller id on a vb 42050 cwc3 (Vendor) 9 Sep 05 19:51 so you are saying that it did work and now it is not? RE: caller id on a vb 42050 largemarge (Vendor) (OP) 11 Sep 05 14:57 yes, the caller id was working with the previous provider who originated the dialtone from a Lucent 5E switch. The new provider has a DMS 500 Nortel....for the life of it they can't get it to work. The carrier suggested to send the customer to Qwest dialtone and switches and they still can't get it to work. Once the vendor options the caller id on in the panasonic, goofy/strange things happen to the calls. they optioned the caller id off and all works fine except for the caller id does not work...Any ideas? RE: caller id on a vb 42050 cwc3 (Vendor) 11 Sep 05 16:07 I think you have answered your own questionthe carrier is to blame maybe time to sell them a new TDA RE: caller id on a vb 42050 johnathcc (TechnicalUser) 22 Sep 05 18:19 We have a customer with a similar problem -- calls placed with Caller ID blocking (*67) go through normally at first, but when the other party answers the KSU suddenly says "BUSY" (this is after you hear the ringback!) and the call is dropped. This started happening when they migrated from plain old telephone service to Voice Over IP through an inverse multiplexer and a fractional T1. I'm beginning to wonder exactly what a Panasonic DBS (this is a VB43060) means when it says "BUSY".If you want to follow our progress, see http://www.tek-tips.com/viewthread.cfm?qid=1123361&page=1Good luck! RE: caller id on a vb 42050 cwc3 (Vendor) 22 Sep 05 18:34 is it happaning between first and second ring?