Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

KXTD1232 ringing issue

Status
Not open for further replies.

dbk227

Vendor
Joined
Jun 20, 2005
Messages
2
Location
US
Hey guys I've got a customer with a 2 cabinet KXTD1232 (rev 101e), & its startin ta piss me off. I just added 2 CO's to the slave cabinet(I have 12 on the master),& I can't get lines 13 & 14 to follow the DIL1:n Day program. When the 2 lines ring, they flash on all appearances except jack 09 (which is the reception station & assigned as MGR & Operator1). On 109, the 2 lines appear like DIL1:1 lines when they ring in. I can set it up as a DIL1:1 & it will ring that way, only trouble is that all lines ring should on 5 stations. Any ideas? The 2 new lines follow the DIL1:n nite program just fine.
 
If all else fails, try sending the calls to a hunt group with members set to be the 5 phones
 
maybe your ksus are out of sync.
 
I have the 2 cabinets talking to each other. (following a different threads advice, I re-synched the cabinets with everything stripped except the link cards). All of the stations work ok & have access to all lines as programmed.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top