×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Line Ringing on 1232

Line Ringing on 1232

Line Ringing on 1232

(OP)
Is there other ways of setting which lines ring on which phones other that forms 603 and 604 on a 1232?  I ask because at a hotel that we service, the main set at the front is the only set that rings even though in forms 603 and 604 all jacks are programmed to ring immediatly on all lines.  What am I missing?  Thanks!

RE: Line Ringing on 1232

yes there is sounds like you have either dil 1 to 1.. or ddi


Description The Direct In Lines (DIL) 1:1 feature allows incoming outside calls
to be directed to a specific extension. When a CO line is assigned
as DIL 1:1, it is necessary to assign the destination. These
programs specify the extension number for day or night mode.
Selection • CO line number: KX-TD816 – 01 through 08, ( * =all CO lines)
KX-TD1232 – 01 through 24, ( =all CO lines)
• Extension number: 2 through 4 digits / Disable (no DIL 1:1)
Default All CO lines – Disable — Day / Night

Programming 1. Enter a program address (407 for day or 408 for night).
Display example: DIL 1:1 Asn Day
2. Press sp phone.
Display: CO Line NO?–> * = all lines or
3. Enter a CO line number.
To enter CO line number 01, you can also press sp phone.
Display example: CO01:Disable
4. Enter an extension number.
To change the current entry, press CLEAR and the new number.
To disable DIL 1:1, press CLEAR.
5. Press autodial/STORE.
6. To program another CO line, press NEXT or PREV, or
SELECT and the desired CO line number.
7. Repeat steps 4 through 6.

Conditions • In the case of KX-TD1232, CO01 through CO12 are for the Master
System and CO13 through CO24 are for the Slave, if available. CO
line numbers in the out-of-service system are unacceptable.
• To assign all CO lines to one selection, press the key at step 3. In
this case, the display shows the contents programmed for CO01.
• You set the extension numbers in program [003] “Extension Number
Set,” ISDN extension numbers in program [012] “ISDN Extension
Number Set” and [017] “TD286 Extension Number Set,” voice mail
extension numbers in program [127] “Voice Mail Extension Number
Assignment,” phantom extension numbers in program [130] “Phantom
Extension Number Assignment” or floating numbers of pagers in
program [813] “Floating Number Assignment.”
• If a CO line is also programmed for DIL 1:N in program [603]–[604]
“DIL 1:N Extension and Delayed Ringing — Day / Night,” it is
regarded as a DIL 1:1 line.
in your case you will need to clear all lines this will give the lines back to the dil 1:n settings

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close