×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

How to connect an extension to a PA System

How to connect an extension to a PA System

How to connect an extension to a PA System

(OP)
I have been asked to setup an extension on our PBX system that when dialed, is connected to a PA system.

What is the right way to do this with a Nortel Meridian system?

Thanks,

Joe

RE: How to connect an extension to a PA System

If the PA system is already interfacing with the PBX, then you would put a hot key on the phone with the access code for the PA system route as the number. You can find the access code in LD 21 by printing out the rout.

LD 21
REQ: prt
type: RDB
cust:0

look for the paging route and write down the # for the "ACOD" prompt for that route, that is the number youw will use for the hot key.

RE: How to connect an extension to a PA System

Hi,

I have the same requirement, I've a PA system, but it's not connected to the PABX, how can I do that.

Thanks

Alfredo Frugone

RE: How to connect an extension to a PA System

Ok first bulid your self a rout (RDB) ld 16 you will have to look up all the prompts it ask for there isent many the main one is ACOD that will be your access code to the paging system once that is done bulid your self a trunk with that rout number in it and what ever TN you use take that to your paging amp or paging adapter what ever you are useing for your paging. If you have problem with the prompts let me know which ones I can walk you through it and if you get all hooked up corectley dial the ACOD number and the paging should work.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close