IP400 So8 ISDN IP400 So8 ISDN tjcom (TechnicalUser) (OP) 21 Apr 05 13:18 Does the IP400 So8 ISDN Module support DID'S.(Canada)thanks RE: IP400 So8 ISDN IPGuru (Vendor) 22 Apr 05 04:56 Yes the So8, Can present DID (& CLI if Req)to achieve this creat a shoret code as followsSC:666 (or anthing else)TN:.Line group ID <OG line group of So Port)Feature:DialIf you now point yor incomming call routes to 666the digits presented by you line provider will be passed on.(check the help files for info on using "-" to match a whole block of DID using 1 incomming call route) RE: IP400 So8 ISDN tjcom (TechnicalUser) (OP) 22 Apr 05 13:15 thanks...I guess this is why your called you the IPGURU!Thanks again RE: IP400 So8 ISDN bigjohn8210 (TechnicalUser) 23 Apr 05 03:22 s08 modules are a pain there is know programing info on them at, all even on the course they dont cover them. RE: IP400 So8 ISDN IPGuru (Vendor) 23 Apr 05 07:42 So programming details can be found in the documents, but you have to look real hard.They were covered on my alchemy course (@ alchemy when they were still in watford, UK) RE: IP400 So8 ISDN oxotower (IS/IT--Management) 18 May 05 08:49 Would DDI work for internal extensions. I want for example to create 10 extensions which forward to a port on the s0 unit and then have the hardware off the s0 route using the DDI info provided. Would I need to create 10 users with unconditional forwards to the shortcode for the S0?Do you have to configure anything to make the port on the s0 a point to point port ?