×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

DND/Group buton on DT miss behaving"

DND/Group buton on DT miss behaving"

DND/Group buton on DT miss behaving"

(OP)
Anybody expeiance this below?

When agent log on to the phones (DT2030) the DND maybe on, when pressing the DND button, nothing happens, or when pressing the group button to go into group/out of group nothing happens, the dot on the phone is always on.
Same with the DND, the dot goes off, but the phone is still on DND.

Also at the same time as this problem, we cannot get into the config either. (manager version 4.1 (27)  We can get as far as entering the password, we enter the password, the bottom status shows that the config is receiving, after a few moment shows that the config is not received.

Cannot get into config over ISDN, or locally.
Other notes, we do not use phone manager, problem happens when there are no PC on the network.
Power off and power on the IP Office then everything woks fine for a day or so.
Happens to users on either DT modules
They have the full CCC call centre software

We factory defaulted the unit via hype terminal, sent the bin file via the cable, re wrote the whole config using manage version 4.1 (27), but are still having the same problem.

Any ideas?  Thanks

RE: DND/Group buton on DT miss behaving"

I assume you are using vmpro. If so, you are most likely using 2.1 10. If so upgrade to 2.1 14. I'm told by Avaya that this is one of the issues with vmpro 2.1 10. You get locked out from pulling configs and do not disturb stops working I have also had problems with call forward all not shutting off when pressing the call forward all.

RE: DND/Group buton on DT miss behaving"

VM Pro V2.1.10 is definitly the cause of the problem
this is known as TFTP lockup.
 A quick "Fix" is ro reboot the IPO (this can be done remotly if necessary) but the problem will return

RE: DND/Group buton on DT miss behaving"

I cannot see a relation between a VM Pro and not to be able to read a config from a IP Office.
The problem of this may be programming faults in the IP Office. Usually multiple names, illegal characters and such things.
I suggest to do a config check with the Wizard first and then set a trace with the sysMon tool for a day or two.
Maybe there is a hardware fault.

RE: DND/Group buton on DT miss behaving"

Intigrant this is a knon issue.
It is listed in the release notes for V2.1(27) & VMP 2.1.14

In simple terms the VMPro swamps the IPO with TFTP requests & locks out The TFTP service in the IPO.
This prevents downloads/uploads & allso affects users making changes from handsets.

Upgrade to VMPro 2.1.14 & the problem will be resolved

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close