creating business cards in Freehand 10 creating business cards in Freehand 10 warby1212 (Programmer) (OP) 14 Mar 05 17:50 Hi, I've got Freehand 10 and want to create business cards etc, how can I set the document size to a business card size. I'm a bit baffled by vector apps I admit. I should write something here. RE: creating business cards in Freehand 10 ishiiboy (TechnicalUser) 16 Mar 05 23:50 At the bottom of your window you will see a popup that allows you to change your unit of measurement--default is points. Change it to inches. Select the page tool form the tool pallet. If your on a Mac hold down your option key and double click on your page. A window will pop up showing the page size. Change it to custom and type in the dimensions you want. Check your orientation and your done.I should mention that most printers like to have cards set up as either 4 or 8 up on a page with crop marks. If this is the case with your printer as well you'll want to turn on "snap to point" under "view" menu and drag guides around the edges of business cards to place crop marks on. RE: creating business cards in Freehand 10 warby1212 (Programmer) (OP) 17 Mar 05 01:54 Ah thanks a million, that's exactly what I needed !Cheers and thanks Stephen I should write something here.